Hammond 1599 Series Black ABS Handheld Enclosure, IP54, 170 x 85 x 34mm
- RS Stock No.:
- 513-5498
- Mfr. Part No.:
- 1599RFIEBK
- Brand:
- Hammond
Image representative of range
Discontinued
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£8.02
(exc. VAT)
£9.62
(inc. VAT)
- RS Stock No.:
- 513-5498
- Mfr. Part No.:
- 1599RFIEBK
- Brand:
- Hammond
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Hammond | |
| Body Material | ABS | |
| External Length | 170 mm | |
| External Width | 85 mm | |
| External Height | 34 mm | |
| IP Rating | IP54 | |
| Colour | Black | |
| External Dimensions | 170 x 85 x 34mm | |
| Series | 1599 | |
| Select all | ||
|---|---|---|
Brand Hammond | ||
Body Material ABS | ||
External Length 170 mm | ||
External Width 85 mm | ||
External Height 34 mm | ||
IP Rating IP54 | ||
Colour Black | ||
External Dimensions 170 x 85 x 34mm | ||
Series 1599 | ||
- COO (Country of Origin):
- CA
RFI Shielded Hand Held Cases
Moulded with an engineered stainless steel fibre compound and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0)
Better shielding properties due to the depth of the shielding (absorption)
Shielding attenuation of approximately 60dB
Recommended for low voltage DC power only
2-piece lap joint construction
Designed to meet IP54
Extra deep top and shallow base sections
Recessed area on top of case for keypads/displays etc
Base with moulded knockouts for wall mounting
Top and base have 6 bosses for PCB mounting
Tops have vertical card guides
Lid is secured with Philips machine screws, threaded into tapped integral brass bushings, ideal for repetive assembley and disassembley
Better shielding properties due to the depth of the shielding (absorption)
Shielding attenuation of approximately 60dB
Recommended for low voltage DC power only
2-piece lap joint construction
Designed to meet IP54
Extra deep top and shallow base sections
Recessed area on top of case for keypads/displays etc
Base with moulded knockouts for wall mounting
Top and base have 6 bosses for PCB mounting
Tops have vertical card guides
Lid is secured with Philips machine screws, threaded into tapped integral brass bushings, ideal for repetive assembley and disassembley
Caution
Conductive plastic is NOT an insulator - these enclosures must be treated like a metal enclosure.
Conductive plastic will act as a heating element - any significant current flow will cause the plastic to heat and produce smoke.
Conductive plastic will act as a heating element - any significant current flow will cause the plastic to heat and produce smoke.