A1395SEHLT-T Allegro Microsystems, Linear Hall Effect Sensor, 6-Pin MLP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

A1391/2/3/5 3V Linear Hall Effect Sensors, Allegro Microsystems

The A1391/2/3/5 family of linear Hall effect sensors provides a voltage output that is directly proportional to an applied magnetic field.

The A139x minimise current consumption to less than 25 μA through the addition of a user-selectable sleep mode, perfect for battery-operated applications. You can control the current consumption by applying a logic level signal to the SLEEP pin. The outputs of the devices are not valid (high-impedance mode) during sleep mode.

High-impedance output during sleep mode
Compatible with 2.5 V to 3.5 V power supplies
10 mW power consumption in the active mode
Ratiometric output scales with the ratiometric supply reference voltage (VREF pin)
Temperature-stable quiescent output voltage and sensitivity
Wide ambient temperature range: –20°C to 85°C
ESD protection greater than 3 kV
Preset sensitivity and offset at final test

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 6
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 3.5 V
Length 2mm
Width 3mm
Height 0.67mm
Dimensions 2 x 3 x 0.67mm
Minimum Operating Temperature -20 °C
Maximum Operating Temperature +85 °C
Package Type MLP
Available to back order for despatch 15/07/2020
Price Each (On a Reel of 3000)
£ 0.695
(exc. VAT)
£ 0.834
(inc. VAT)
Units
Per unit
Per Reel*
3000 +
£0.695
£2,085.00
*price indicative
Related Products
A Hall-effect sensor switch from IXYS suitable for ...
Description:
A Hall-effect sensor switch from IXYS suitable for low-power low-voltage applications. On-chip power management circuitry reduces the effective average current to just 5uA at 3V making the device ideal for portable devices. The MX887D is an omnipolar device and switches in the presence of either a north or south magnetic ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity magnetic field is required to turn on the output and ...
3D magnetic flux density sensing of ±160m TProgrammable ...
Description:
3D magnetic flux density sensing of ±160m TProgrammable flux resolution down to 65μT (typ.)X-Y angular measurement mode Power down mode with 7nA (typ) power consumption12bit data resolution for each measurement direction plus 10bit temperature sensor Variable update frequencies and power modes (configurable during operation)Temperature range Tj=-40 °C…125°C, supply voltage range ...