ACS758LCB-050B-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB PFF

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems

Allegro Current sensor ICs in CA and CB packages
Conductor resistance of 100 μΩ typical for ultra low-power loss
Automotive grade options for harsh applications environments
3000 Vrms galvanic isolation

Hall Effect Current Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 5
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 5.5 V
Length 10mm
Width 13mm
Height 7mm
Dimensions 10 x 13 x 7mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type CB PFF
34 In stock - FREE next working day delivery available
Price Each (In a Tube of 34)
£ 3.912
(exc. VAT)
£ 4.694
(inc. VAT)
Units
Per unit
Per Tube*
34 +
£3.912
£133.008
*price indicative
Related Products
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity magnetic field is required to turn on the output and ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum voltage rating for automotive and industrial motor commutation applications.All devices ...
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive ...
Description:
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output.This device has an integrated regulator permitting operation to 24 V.They are suitable for operation through extended ...