From RS Pro, these aluminium enclosures with flanges for wall mounting or mounting on a place of installation to house electrical components. Made of Aluminium alloy ADC-12 with a stove acrylic finish. Close fitting lips are secured with Stainless Steel M3.5 countersunk screws. All models are highly reliable and excellent quality.

Diecast aluminium alloy (LM2, BS1490)
Stove Finish - is a coarse textured acrylic stove finish
Close fitting lids with lip secured by stainless steel M3.5 countersunk screws
Minimum wall thickness 1.6 mm

Unfortunately not, as this enclosure does not offer an IP rating, use of the enclosure in an outdoor environment would put the contents at risk.

What is an enclosure?

General purpose enclosures are protective boxes, used to house industrial, electronic and other sensitive equipment. Depending on the environment, different levels of protection may be required. These particular boxes enclose electrical and medical components and shield them from interfering circumstances.

RS Pro Shielded Aluminium alloy ADC12 enclosure / box is designed to manage high temperature conditions not greater than 150°C and is a good quality aluminium. The enclosure is not sealed but has a lipped fitted lid which is securely screwed in place. The enclosure / box has a wall thickness of 2 mm.

Diecast aluminium alloy ADC 12 (LM2, BS1490).

No, this enclosure is not sealed but is supplied with a lip providing a secure fit.