ROHM BH2223FV-E2, 10-Channel Serial DAC, 16-Pin SSOP

  • RS Stock No. 169-9337
  • Mfr. Part No. BH2223FV-E2
  • Brand ROHM
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BH2223FV and BH2221FV are high performance 8bit R-2R-type D / A converters with 10 and 12 channels outputs, respectively. A built-in RESET function ensures that the output voltage at all channels is Low during power up. And a broad power supply voltage range (2.7V to 5.5V) provides design flexibility.

Built-in RESET function
High speed output response characteristics
3-line serial interface
Broad power supply voltage range : 2.7V to 5.5V
Barcode Scanner
Digital Still Camera
Digital Video Camera
PPC (Plain Paper Copier)

Attribute Value
Resolution 8 bit
Number of DAC Channels 10
Digital Interface Type Serial (3 Wire)
Mounting Type Surface Mount
Package Type SSOP
Power Supply Type Single
Typical Single Supply Voltage 2.7 → 5.5 V
Voltage Reference External
Architecture R-2R
Pin Count 16
Maximum Settling Time 100µs
Output Polarity Unipolar
Dimensions 5 x 4.4 x 1.15mm
Width 4.4mm
Height 1.15mm
Minimum Operating Temperature -20 °C
Length 5mm
Maximum Operating Temperature +85 °C
Integral Nonlinearity Error ±1.5LSB
20 In stock - FREE next working day delivery available
12 available from Europe for delivery within 5 working day(s).
Price Each (In a Pack of 2)
£ 3.33
(exc. VAT)
£ 4.00
(inc. VAT)
Per unit
Per Pack*
2 - 8
10 - 98
100 - 498
500 - 998
1000 +
*price indicative
Related Products
The MAX5717 and MAX5719 are serial-input, unbuffered 16 ...
The MAX5717 and MAX5719 are serial-input, unbuffered 16 and 20-bit voltage-output unipolar digital-to-analog converters (DACs) with integrated feedback resistors that allow bipolar operation when used with an external operational amplifier. These DACs provide low glitch energy, low noise, tight bipolar resistor matching, and high accuracy. The DACs feature 1LSB INL ...
16-/12-Bit Resolution Available in a 4mm x 4mm, ...
16-/12-Bit Resolution Available in a 4mm x 4mm, 24-Pin TQFN Package or 16-Pin TSSOPHardware-Selectable to Zero/Midscale DAC Output on Power-Up or Reset Double-Buffered Input Registers Active-Low LDAC Asynchronously Updates DAC Outputs Simultaneously Active-Low READY Facilitates Daisy Chaining High-Performance 10ppm/°C Internal Reference Guaranteed Monotonic Over All Operating Conditions Wide +2.7V to ...
2.7V to 3.3V Single-Supply Operation Wide Spurious-Free Dynamic ...
2.7V to 3.3V Single-Supply Operation Wide Spurious-Free Dynamic Range: 70dB at f OUT = 2.2MHz Fully Differential Outputs for Each DAC±0.5% FSR Gain Mismatch±0.2° Phase Mismatch Low-Current Standby or Full-Shutdown Modes Internal 1.2V Low-Noise Bandgap Reference Small 28-Pin QSOP Package Applications Arbitrary Waveform Generation (AWG)Digital Signal Processing (DSP)Imaging Signal Reconstruction ...
+2.5V to +5.5V Single-Supply Operation±1LSB (max) TUEPower-On Reset ...
+2.5V to +5.5V Single-Supply Operation±1LSB (max) TUEPower-On Reset Clears All Registers to Zero Low Operating Current:150μA (MAX548A/MAX549A, VREF = +2.5V)75μA (MAX550A, VREF = +2.5V) 1μA Shutdown Mode10MHz, 3-Wire Serial Interface Compatible with SPI/QSPI and MicrowireμMAX Package-50% Smaller than 8-Pin SOIndependent Shutdown of DACs (MAX548A/MAX549A) Applications/Uses Battery-Powered Applications Comparator-Level Settings Digital ...