The Kane 450-201 flue gas analyser has an easy-to-use rotary switch and includes all the features expected from a top-of-the-range analyser. Any four parameters can be displayed simultaneously. The high accuracy and stability of its pressure readings allow difficult tasks such as measuring flue draught and checking the air\fuel ratio valve on high-efficiency boilers to be performed with confidence. It is fitted with a 0 to 4,000ppm CO sensor and is suitable for commercial and domestic boilers.
Supplied with:
Protective rubber sleeve with a magnet, flue probe, rechargeable batteries, 220V charger, infrared printer, pressure connectors and carry case.

Four line backlit display controlled by a rotary switch
Measures O2, CO, temperature and pressure
Extra protection and hands-free operation
Optional Bluetooth upgrade
Quick start feature for temperature and pressure readings
High accuracy differential manometer
Differential thermometer for flow/return/ΔT
Hold, store and auto-store readings
Reports include combustion test, tightness test, CO build-up and differential temperature
Infrared output to a thermal paper printer
Torchlight
Connection for optional gas leak detector
Designed to meet BS7927, EN 50379 and BS7967
Battery life typically is 12+ hours from full charge
Large display with backlight
Carbon monoxide resolution is 1ppm
Carbon dioxide resolution is 0.1%
Oxygen level resolution is 0.1%
Gas pressure resolution is 0.01mbar, 0.1Pa, 1Pa
Temperature measurement resolution is 1°C
Temperature sensor is Type-K
Pre-programmed fuels are butane, light oil, LPG, natural gas, propane
Maximum oxygen level is 21%
Maximum gas pressure is 20mbar, 80mbar, 100mbar, 2000mbar
Minimum gas pressure is -2000mbar, -100mbar, -80mbar, -20mbar
Minimum oxygen level is 0%
Battery life of 12 hours

Installation, commissioning & service of domestic & commercial oil, gas biomass appliances
Safety checks CO in a room or around an appliance
Combustion performance checks
Combustion efficiency checks
Flue Draught

BS7927
EN 50379
BS7967