Cynergy3 Vertical Float Switch Stainless Steel NO/NC Float 1m

  • RS Stock No. 756-4188
  • Mfr. Part No. SSF67A25B250
  • Brand Cynergy3
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Dual Position Stainless Steel Float Switch

Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.

Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications

Note

All ratings in tech. spec. table are for resistive loads only

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specifications
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Stainless Steel
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +135°C
Maximum Current 600 mA
Maximum Pressure 10bar
Gasket Material Nitrile
Series SSF67
5 In stock for FREE next working day delivery
Price Each
£ 160.73
(exc. VAT)
£ 192.88
(inc. VAT)
Units
Per unit
1 +
£160.73
Related Products
Bottle level switches can be mounted externally at ...
Description:
Bottle level switches can be mounted externally at the desired level point when access to the tank interior is not possible. Suitable for both large and small tanks they can be set for normally open or closed operation by inverting the float on its stem. Available with a brass, aluminium ...
A stainless steel vertical float switch fitted with ...
Description:
A stainless steel vertical float switch fitted with an acrylic guard to help prevent against accidental operation caused by turbulent fluids. The float switch can be bought with an extra test facility allowing the float to be manually lifted to check correct operation. • Integrated mounting bracket• Manufactured from 316 ...
A single switch point level probe ideal for ...
Description:
A single switch point level probe ideal for use in water or other aqueous liquids. It can be suspended into liquid by a cable and can be configured to give make or break action. By varying the cable length the switching level may be adjusted. For Use with Water and ...
SSF28 series float switch has been designed to ...
Description:
SSF28 series float switch has been designed to work at high pressures and can be vertically mounted within the tank. Suitable For Use in Pressurised Chambers Containing Liquid Chemicals or Food Processing Liquids Capable of Operation Up to 40 Bar Vertically Mounted in the Top or Bottom of the Tank ...