Microchip LAN9221I-ABZJ, Ethernet Controller, 10 Mbps, 100 Mbps MII, 3.3 V, 56-Pin QFN

  • RS Stock No. 798-5236
  • Mfr. Part No. LAN9221I-ABZJ
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LAN9220/9221 10/100 Ethernet Controllers

Ethernet Communications - Microchip

Specifications
Attribute Value
Physical Network Type 10BaseT, 100BaseTX
Network Interface MII
Communication Mode Full Duplex, Half Duplex
Data Rate 10 Mbps, 100 Mbps
Loopback Mode Internal
Standard Supported IEEE 802.3, IEEE 802.3u
Mounting Type Surface Mount
Package Type QFN
Pin Count 56
Auto-Negotiation Yes
DMA Support Yes
Typical Operating Supply Voltage 3.3 V
Dimensions 7.95 x 7.95 x 0.9mm
Length 7.95mm
Maximum Operating Temperature +85 °C
Height 7.95mm
Width 0.9mm
Minimum Operating Temperature -40 °C
810 In stock for FREE next working day delivery
Price Each
£ 6.73
(exc. VAT)
£ 8.08
(inc. VAT)
Units
Per unit
1 - 9
£6.73
10 - 24
£5.85
25 - 99
£5.63
100 +
£5.15
Packaging Options:
Related Products
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect with an external 100Base-FX fiber optic tranceiverW3100A-LF is a fully ...
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port Ether CAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber ...
The 7100A device is an Ethernet controller SoC ...
Description:
The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an external host via an SPI serial bus. i MCU W7100A ...
ENC28J60-I/SS | Microchip ENC28J60-I/SS, Ethernet Controller, 10Mbps MII, ...
Description:
ENC28J60-I/SS | Microchip ENC28J60-I/SS, Ethernet Controller, 10Mbps MII, MIIM, Serial-SPI, 3.3 V, 28-Pin SSOP