Bulk discount available
Subtotal (1 unit)*
£14.51
(exc. VAT)
£17.41
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 83 unit(s) ready to ship
- Plus 38 unit(s) ready to ship from another location
- Plus 240 unit(s) shipping from 13 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
1 - 9 | £14.51 |
10 - 19 | £13.92 |
20 + | £13.50 |
*price indicative
- RS Stock No.:
- 552-898
- Brand:
- RS PRO
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | RS PRO | |
Accessory Type | Grounding Cord | |
Connector Type | 10 mm Socket | |
Termination Type | Press Stud - Banana Plug/Croc Clip | |
Complies with EN 61340-5-1 | Yes | |
Cord Length | 1.8m | |
Resistance | 2mΩ | |
Cord Style | Coiled | |
Stud Size | 10mm | |
Select all | ||
---|---|---|
Brand RS PRO | ||
Accessory Type Grounding Cord | ||
Connector Type 10 mm Socket | ||
Termination Type Press Stud - Banana Plug/Croc Clip | ||
Complies with EN 61340-5-1 Yes | ||
Cord Length 1.8m | ||
Resistance 2mΩ | ||
Cord Style Coiled | ||
Stud Size 10mm | ||
RoHS Status: Exempt
RS PRO Coiled Cords
In every ESD (electrostatic discharge) environment grounding is essential for blocking ESD. This coiled cord from our own RS PRO brand will safely direct static electricity to the ground. This will protect workers and equipment in an environment where sensitive electronic equipment is used, manufactured, assembled or repaired.
Features and Benefits
• High visibility - bright colours allow the supervisor to see that worker is wearing a wrist strap
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief
Always remember!
• Test the ground before you use it
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
Wrist bands and cords must be ordered separately.
Standards
Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance
Related links
- RS PRO ESD Grounding Cord With 10 mm Socket
- RS PRO ESD Grounding Cord With 10 mm Stud
- Notrax ESD Grounding Cord With 10 mm Socket
- RS PRO ESD Snap With 10 mm Socket
- RS PRO ESD Grounding Wrist Strap & Cord Set With 10 mm Socket, 10 mm Stud
- RS PRO ESD Snap With 10 mm Socket, 10 mm Stud
- RS PRO ESD Field Kit With 10 mm Socket, 10 mm Stud
- SCS ESD Grounding Cord With 10 mm Snap