Siemens Emergency Stop Push Button, Surface Mount, SPST, IP67
- RS Stock No.:
- 742-9271
- Mfr. Part No.:
- 3SB3801-2DG3
- Brand:
- Siemens
Unavailable
RS will no longer stock this product.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£77.59
(exc. VAT)
£93.11
(inc. VAT)
- RS Stock No.:
- 742-9271
- Mfr. Part No.:
- 3SB3801-2DG3
- Brand:
- Siemens
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Siemens | |
| Mounting Type | Surface Mount | |
| Contact Configuration | SPST | |
| Illuminated | No | |
| IP Rating | IP67 | |
| Depth | 114mm | |
| Width | 85mm | |
| Bezel Material | Plastic | |
| Push Button Material | Plastic | |
| Height | 85mm | |
| Select all | ||
|---|---|---|
Brand Siemens | ||
Mounting Type Surface Mount | ||
Contact Configuration SPST | ||
Illuminated No | ||
IP Rating IP67 | ||
Depth 114mm | ||
Width 85mm | ||
Bezel Material Plastic | ||
Push Button Material Plastic | ||
Height 85mm | ||
- COO (Country of Origin):
- DE
The mounting type of the enclosure of this 3SB3801-2DG3 can be vertically only.
The high quality falls under degree of protection IP67, which means ’’dust tight’’ and protected against immersion.
The ambient temperature during operation ranging from -25°C to +70°C, during storage -40°C to +80°C.
This is a typical emergency off/stop function device with a vibration resistance 20 ... 200 Hz: 5g (acc. to IEC 60068-2-6).
The high quality falls under degree of protection IP67, which means ’’dust tight’’ and protected against immersion.
The ambient temperature during operation ranging from -25°C to +70°C, during storage -40°C to +80°C.
This is a typical emergency off/stop function device with a vibration resistance 20 ... 200 Hz: 5g (acc. to IEC 60068-2-6).
Frequently asked questions & answers
What is the different between a push button switch for an emergency stop and a general-purpose push button switch?
A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.
What is a category for taking back electrical and electronic equipment after use?
There are no obligations to take back electrical and electronic equipment after use.
PHASE OUT NOTIFICATION
This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.