Fluke 1651B Electrical Tester, 250 V, 500 V, 1000 V No With UK Mains

RS Stock No.:: 712-5954
Mfr. Part No.:: Fluke 1651B
Brand:: Fluke

Fluke 1651B Electrical Tester, 250 V, 500 V, 1000 V No With UK Mains

Unavailable

RS will no longer stock this product.

Alternative

This product is not currently available. Here is our alternative recommendation.

Fluke 1662 Multifunction Tester, 100 V, 250 V, 500 V, 1000 V

RS Stock No.: 113-5128

Each

£1,204.93

(exc. VAT)

£1,445.92

(inc. VAT)

Calibration Options:

Fluke 1651B Electrical Tester, 250 V, 500 V, 1000 V With UK Mains UKAS Calibration

Calibration Type:: UKAS

RS Stock No.: 712-8708

Each

£641.00

(exc. VAT)

£769.20

(inc. VAT)

RS Stock No.:: 712-5954
Mfr. Part No.:: Fluke 1651B
Brand:: Fluke

Specifications

Technical Reference

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Fluke
	Loop Impedance Test Type	3 Wire
	Automatic RCD Test	No
	Model Number p	1651B
	RCD Ramp Test	No
	Non-Tripping	Yes
	Insulation Test Voltage	250 V, 500 V, 1000 V
	Maximum Voltage Measurement	500V ac
	Test Type	Continuity, Wiring Polarity
	Earth Resistance Measurement	No
	Downloadable Data	Yes
	Interface Type	UK Mains
	Continuity Test Current	200mA
	RCD Test Type	AC Type
	Remote Switch Mode	Yes
	Test Standards	BS 7671, EN 61010-I, HD 384, IEC 60364
	IP Rating	IP40
	Length	100mm
	Minimum Continuity Resistance	20Ω
	Width	250mm
	Power Source	Battery, Mains
	Minimum Operating Temperature	-10°C
	Continuity Range	20 → 2000 O
	Dimensions	100 x 250 x 125mm
	Safety Category Level	CAT III, CAT IV
	Operating Temperature Range	-10 → +40 °C
	Height	125mm
	Battery Type	AA
	Voltage Measurement Range	50 → 1000V
	Safety Category	CAT III 500 V, CAT IV 300 V
	Weight	1.5kg
	Safety Category Voltage	300 V, 500 V
	Maximum Continuity Resistance	2000Ω
	Plug Type	Type F - Schuko plug, Type G - British 3-pin
	Maximum Operating Temperature	+40°C
	Display Type	LCD

	Select all
	Brand Fluke
	Loop Impedance Test Type 3 Wire
	Automatic RCD Test No
	Model Number p 1651B
	RCD Ramp Test No
	Non-Tripping Yes
	Insulation Test Voltage 250 V, 500 V, 1000 V
	Maximum Voltage Measurement 500V ac
	Test Type Continuity, Wiring Polarity
	Earth Resistance Measurement No
	Downloadable Data Yes
	Interface Type UK Mains
	Continuity Test Current 200mA
	RCD Test Type AC Type
	Remote Switch Mode Yes
	Test Standards BS 7671, EN 61010-I, HD 384, IEC 60364
	IP Rating IP40
	Length 100mm
	Minimum Continuity Resistance 20Ω
	Width 250mm
	Power Source Battery, Mains
	Minimum Operating Temperature -10°C
	Continuity Range 20 → 2000 O
	Dimensions 100 x 250 x 125mm
	Safety Category Level CAT III, CAT IV
	Operating Temperature Range -10 → +40 °C
	Height 125mm
	Battery Type AA
	Voltage Measurement Range 50 → 1000V
	Safety Category CAT III 500 V, CAT IV 300 V
	Weight 1.5kg
	Safety Category Voltage 300 V, 500 V
	Maximum Continuity Resistance 2000Ω
	Plug Type Type F - Schuko plug, Type G - British 3-pin
	Maximum Operating Temperature +40°C
	Display Type LCD

Fluke 1650B Series Multifunction Installation Testers Extended Specifications

RoHS Status: Not Applicable

COO (Country of Origin):: US

Fluke 1650 Series

Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applications
Meet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulations
Large illuminated display with exceptionally wide viewing angle
Rugged: withstand a one meter drop for demanding field use
All inputs are protected to EN 61010-1, CAT III 500V
Battery indicator, and battery test function
Weight 1.2kg

Support Accessories:

TP165X remote probe Slim line remote probe with built-in test button to facilitate one-handed measurements on Fluke 1650 & 1650B series installation testers see 468-0616
TL165X fused test lead set see 468-1063
FTP165X/UK (RS 754-1258) is an optional accessory set for the Fluke 165X (UK version)
TL165/UK (RS 754-1252) is an optional fused test probe set for Fluke 165X (UK version)
Earth Spike Test kit: For earth resistance testing on the Fluke 1653 & 1653B using the 3 wire connection method and auxiliary earth spikes.
Contains Auxiliary earth probes, test connection leads and crocodile clips, purpose-made carry case . See 468-0600
FVF-SC2 FlukeView® documenting software: for documenting, storage and analysis of measurements, from the Fluke 1653B and 1654B. Allows editing of an existing form or creation of a new form to customize the report to individual needs
Contains software on CD-ROM and USB/ IR interface cable See 385-0599

Note

6AA Alkaline are originally supplied, 1.2V NiMh are also suitable; all stored data will be lost if batteries are not replaced within approximately 1 minute for model 1653B and 1654B
RS is currently unable to supply replacement fuses for these products.

Supplied with

(All models): detachable leads (TP165X & TL165X), 6 AA cell batteries, a durable hard carrying case, padded carrying strap, mains test cord, quick reference guide.