Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Push in connection
Voltage: 500 V
Current: 24 A
Variants in 1.5 mm² and 2.5 mm²
2.5 mm² power blocks with additional 6 mm² terminal point
Number of terminal points: 6, 12 and 18
Can be bridged and aligned with standard plug-in bridges
Testing option for all common test probes

Use this 7-way distribution block from Phoenix Contact to distribute power from a single input source to various devices. It has a housing made of a durable polyamide material that's heat and corrosion-resistant, making it a good choice for use in demanding industrial environments. This material also has excellent insulation properties, so it protects you and your equipment against electrical hazards.
The component comes ready to use thanks to its push-in termination technology. To connect your devices with minimal effort, you can simply plug your conductors into the terminals without using any specialist tools. The unit also offers a variety of mounting options – clip it onto your DIN rail or use adhesive to install it on an electrical panel. You'll find blocks such as this in a range of settings, from motorhomes to domestic set-ups and commercial environments.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²
• Grey in colour
• Current rating of 24 A, 41 A at 6 mm²
• Not fused
• Voltage rating of 500 V
• Wire size of 26 to 12 AWG (American Wire Gauge)

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.