Phoenix Contact PTTB 2.5 BU Series Blue Double Level Terminal Block, 0.14 → 4mm², Double-Level, Push In

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

• Can be bridged together easily with multi-conductor and function terminals
• Single, Double and triple levels available
• 50 % less insertion force
• Direct plugging from 0.34 mm²
• Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
• Actuation button can be operated with any kind of screwdriver
• Compact design and front connection facilitate wiring in the smallest of spaces
• Double bridge shaft for an individual power distribution and supply

This double-level terminal block from Phoenix Contact is a safe and easy way to connect wires in a circuit where space is tight. With four connections spread over two levels, it takes up less room than a single-level alternative so is ideal for organising a crowded control cabinet. The two levels are offset to give easy access to both, even when the terminal block is fully wired. You'll find units like this used in the railway industry, machine building or process manufacturing.
As part of the PT series, this product uses Phoenix Contact’s innovative CLIPLINE complete system. This makes it bridgeable with other multi-conductor and function terminals and lets you put together a fully customised terminal block system. A straightforward push-in connection method and lateral conductor entry make wiring quick and easy, even in confined spaces.

• ATEX certification guarantees safety in environments with a potentially explosive atmosphere
• Plug-in connection method uses 50% less insertion force to reduce conductor wear
• Flame-retardant polyamide housing offers protection from fire and electrical hazards for maximum safety

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.