BEL POWER SOLUTIONS INC, LWN DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 5A Output Current

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SK
Product Details

125 & 250W Industrial Grade Convert Select Series

The Convert Select series are DIN Rail mountable DC-DC and AC-DC converters. They have power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as input over/under voltage lockout, thermal protection, output overvoltage protection by a control loop ensure safe operation of the final system. The Convert Select series are designed according to the latest industry requirements and standards.

Features and Benefits

Rugged 35 mm DIN Rail snap-fit design
Class I equipment
Universal AC-input or DC-input with single stage conversion
Power factor correction, harmonics IEC/EN 61000-3-2
Virtually no inrush current
Power factor correction, harmonics IEC/EN 61000-3-2
Immunity to IEC/EN61000-4-2/3/4/5/6/11
High efficiency 89%
Short-term peak capacity 150% nominal rating, with rectangular current limit
Independently regulated outputs
Outputs: no load, overload and short circuit proof
MTBF greater than 600000 hours
Emissions according to EN 55011/022
PCBs coated by protective lacquer
High reliability
RoHS compliant

Applications

The Convert Select series are suitable to power building control systems, factory automation, industrial controls, instrumentation, electromagnetic drives, fans and other DC loads.

Note

Operating temperature is without de-rating.

Standards

EN/IEC60950, UL1950, CSA22.22 950, IEC/EN50178, IEC61010, UL508.

Approvals

CE, cSAus, cULus.

Approvals

EN/IEC60950; UL1950; CSA22.22 950; IEC/EN50178; IEC61010; UL508

Standards

IEC, EN, UL

Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 5 A
Power Rating 250W
Number of Outputs 2
Electrical Phase 1
Type Switch Mode
Height 138mm
Width 103mm
Series LWN
MTBF 600000h
Maximum Temperature +60°C
Minimum Temperature -40°C
Mounting Type DIN Rail Mount
Efficiency 87.0%
Load Regulation -0.4V
Output Voltage Adjustment Range 24.0 to 25.8V
Ripple And Noise 100mV Pk-Pk
Depth 113.6mm
8 In stock for FREE next working day delivery
Price Each
£ 299.86
(exc. VAT)
£ 359.83
(inc. VAT)
Units
Per unit
1 +
£299.86
Related Products
The single phase switched mode power supply (SMPS) ...
Description:
The single phase switched mode power supply (SMPS) from Block is highly efficient and has a stabilised and adjustable output voltage. Equipped with a wide input range of 85 V ac to 264 V ac. All models have push in terminals so they can be connected quickly. DC OK signalling ...
DC-DC Ultra slim Industrial DIN rail converter, Input ...
Description:
DC-DC Ultra slim Industrial DIN rail converter, Input 9-36Vdc, Single Output 24Vdc at 2.5A. Width only 52.5mm (3SU)4:1 ultra wide input range-40∼+85°C wide working temperature No minimum load required DC output adjustable ( 10% ±)Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15Protections: Short circuit ...
Input voltage: 100 to 240V AC (voltage range: ...
Description:
Input voltage: 100 to 240V AC (voltage range: 85 to 264V AC/110 to 350V DC)The terminals are captive spring-up screws. Ring or fork terminals can be used.Finger-safe construction prevents electric shocks.Panel mounting bracket and side-mounting panel mounting bracket. Can be attached to a DIN rail or directly to a panel ...
The PULS DIN rail DC/DC converter has an ...
Description:
The PULS DIN rail DC/DC converter has an input voltage range from 100VAC to 240VAC. The modern machines typically use maintenance free AC motors, controlled by frequency converters or servo amplifiers. This converter has an intermediate DC bus where all individual drives are connected. The output current is 20A and ...