MPN

MEAN WELL NDR Switched Mode DIN Rail Power Supply, 90 → 264V ac ac Input, 24V dc dc Output, 20A Output, 480W

RS Stock No.:: 122-2230
Distrelec Article No.:: 300-44-175
Mfr. Part No.:: NDR-480-24
Brand:: MEAN WELL

MEAN WELL NDR Switched Mode DIN Rail Power Supply, 90 → 264V ac ac Input, 24V dc dc Output, 20A Output, 480W

Subtotal (1 unit)*

£201.99

(exc. VAT)

£242.39

(inc. VAT)

FREE delivery for orders over £50.00

In Stock

311 unit(s) ready to ship
Plus 30 unit(s) ready to ship from another location
Plus 99,999,688 unit(s) shipping from 11 December 2025

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	£201.99

*price indicative

RS Stock No.:: 122-2230
Distrelec Article No.:: 300-44-175
Mfr. Part No.:: NDR-480-24
Brand:: MEAN WELL

Mean Well NDR Series Single Output Industrial DIN Rail Power Supply

Economical and slim, the NDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.
The entire series can operate between -20°C and 60°C under air convection.

Features and Benefits

• Universal AC input/Full range
• Short circuit/Overload/Over voltage/Over temperature protections
• Can be installed on DIN Rail TS-35/7.5 or 15
• Cooling by free air convection
• UL 508 (industrial control equipment) approved
• EN61000-6-2 (EN50082-2) industrial immunity level
• 100% full load burn-in test
• 3 years warranty
• Built-in active PFC function (NDR-240 & NDR-480)

Product Application Information

The NDR series PSU by Mean Well is ideal for use in industrial control systems, semiconductor fabrication equipment, factory automation and electro-mechanical apparatus.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.

Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.

Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Mean Well NDR-480-24 Power Supply, 24 V, 20 A, 480 W

Efficiency 92.5 %

Note

Available on EPLAN.

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	MEAN WELL
	Series	NDR
	Type	Switched Mode
	Electrical Phase	1
	Number of Outputs	1
	AC or DC Input Voltage	ac
	Input Voltage	90 → 264V ac
	AC or DC Output Voltage	dc
	Output Voltage	24V dc
	Output Current	20A
	Dimensions	125.2 x 85.5 x 128.5mm
	Height	125mm
	Depth	129mm
	Width	85.5mm
	Ripple And Noise	150mV Pk-Pk
	Output Voltage Adjustment Range	24 → 28V
	Special Features	Overvoltage and Short Circuit Protection
	Standards Met	RoHS Compliant, TUV EN 60950-1, UL 508
	Minimum Temperature	-20°C
	MTBF	146.8kh
	Load Regulation	±1%
	Mounting Type	DIN Rail Mount
	Maximum Temperature	+70°C

	Select all
	Brand MEAN WELL
	Series NDR
	Type Switched Mode
	Electrical Phase 1
	Number of Outputs 1
	AC or DC Input Voltage ac
	Input Voltage 90 → 264V ac
	AC or DC Output Voltage dc
	Output Voltage 24V dc
	Output Current 20A
	Dimensions 125.2 x 85.5 x 128.5mm
	Height 125mm
	Depth 129mm
	Width 85.5mm
	Ripple And Noise 150mV Pk-Pk
	Output Voltage Adjustment Range 24 → 28V
	Special Features Overvoltage and Short Circuit Protection
	Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
	Minimum Temperature -20°C
	MTBF 146.8kh
	Load Regulation ±1%
	Mounting Type DIN Rail Mount
	Maximum Temperature +70°C

Be the first to know about our latest products and services

Join our mailing list today:

The personal information you provide to us when signing up to the mailing list will be processed in line with our privacy policy.