The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.
Series Benefits.
Output voltages easily identified by colour coded labels on the side of the unit Meets the latest European and relevant international standard Operating temperature range 0°C to +50°C
Part Number S8VM-01524AD
The S8VM Switch mode, DIN Rail-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-01524AD has a power rating of 15 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This model also includes a Sinking under-voltage alarm with green output indicators and is natural air-cooled. The under-voltage alarm allows you to investigate any errors and a power failure alarm notifies you of output voltage errors.
Features and Benefits.
• Covered type power supply
• Terminal block structure
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• DIN Rail Mounting
• Sinking – Under-voltage alarm (no outputs)
• Green output indicators
• Natural air cooled
• Power rating 15 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Efficiency 80% min.
• Frequency 50/60 Hz
• Rated output current 0.65 A
• Electric shock finger protection
• RoHS compliant including Lead Free construction
What is a DIN Rail Mounted Power Supply?
A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.
What is A Switch Mode Power Supply?
Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.
Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.