SEGGER J-Link ULTRA+ Debugging Emulator for use with Flash microcontrollers

  • RS Stock No. 131-1321
  • Mfr. Part No. 8.16.28 J-Link ULTRA+
  • Brand SEGGER
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link ULTRA+ Probe

J-Link ULTRA+ is a JTAG/SWD programming and debug probe supporting a large number of processor cores. It features seamless integration into the IAR Embedded Workbench IDE and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash.

Supported Processors

• ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features

• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 3MB/sec
• Supports unlimited breakpoints in Flash memory
• Supports breakpoints in external Flash memory of Cortex-M systems
• Supports concurrent access to CPU by multiple applications
• Remote Server included. Allows using J-Link remotely via TCP/IP
• Automatic core recognition
• Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
• Supports J-Flash Production Flash programming
• Maximum target interface speed: 50MHz
• Maximum SWO sampling speed: 100MHz
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• RDI / RDDI interface
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG/SWD 20-pin
• PC interface: USB 2.0 HS
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Flash DLL available
• Software Developer Kit (SDK) available
• Free software updates, 1 year of support

Target Adapters & Adapter Cables

131-1325 J-Link Target Power Supply Adapter • 131-1326 J-Link 10-pin Needle Adapter
131-1327 J-Link RX100/200/600 MCU Adapter
131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards

131-1335 J-Link ARM JTAG Isolator Board • 131-1336 J-Link ARM SWD Isolator Board
131-1337 J-Link USB Isolator Board

Supplied with

USB cable, 20-pin ribbon cable

Specifications
Attribute Value
For Use With Flash microcontrollers
1 In stock for FREE next working day delivery
Price Each
£ 677.24
(exc. VAT)
£ 812.69
(inc. VAT)
Units
Per unit
1 +
£677.24
Related Products
J-Trace PRO for Cortex-M enables continuous streaming trace ...
Description:
J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. It also offers extended trace features, such as code ...
The Power Debugger is a powerful development tool ...
Description:
The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M based SAM microcontrollers.Extra features of the Power Debugger are two ...
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec• Compatible with Xilinx ISE 14.1 and ...
The JTAG-SMT2 surface-mount programming module allows high-speed programming ...
Description:
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted. • Compatible with all Xilinx tools• Compatible ...