DOGA Geared DC Geared Motor, 24 V dc, 12 Nm, 25 rpm, 9mm Shaft Diameter
- RS Stock No.:
- 181-6490
- Mfr. Part No.:
- 317.2761.3B.00E
- Brand:
- DOGA
Subtotal (1 unit)*
£152.99
(exc. VAT)
£183.59
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- Plus 1 unit(s) shipping from 22 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £152.99 |
*price indicative
- RS Stock No.:
- 181-6490
- Mfr. Part No.:
- 317.2761.3B.00E
- Brand:
- DOGA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | DOGA | |
| Supply Voltage | 24 V dc | |
| DC Motor Type | Geared | |
| Output Speed | 25 rpm | |
| Shaft Diameter | 9mm | |
| Maximum Output Torque | 12 Nm | |
| Gearhead Type | Worm | |
| Gear Ratio | 62:1 | |
| Dimensions | 43.8 x 177.5 x 90.8 mm | |
| Current Rating | 1.1 A | |
| Length | 43.8mm | |
| Width | 177.5mm | |
| Depth | 90.8mm | |
| Series | 317 | |
Select all | ||
|---|---|---|
Brand DOGA | ||
Supply Voltage 24 V dc | ||
DC Motor Type Geared | ||
Output Speed 25 rpm | ||
Shaft Diameter 9mm | ||
Maximum Output Torque 12 Nm | ||
Gearhead Type Worm | ||
Gear Ratio 62:1 | ||
Dimensions 43.8 x 177.5 x 90.8 mm | ||
Current Rating 1.1 A | ||
Length 43.8mm | ||
Width 177.5mm | ||
Depth 90.8mm | ||
Series 317 | ||
- COO (Country of Origin):
- ES
The DOGA 317 series comprises of a permanent magnet DC motor with worm gearbox developed for a compact, low noise and cost effective solution to suit many applications. Standard supply voltages are 12 or 24Vdc that can be supplied from a battery or power supply unit, with nominal output torque up to 4Nm and starting torque up to 12Nm the geared motor is suitable for applications that need high power at start-up. Output speeds range from 25rpm up to 65rpm to suit the application requirements, a DC motor controller can be used with this motor if variable output speed control is required. Protected against dust and water ingress and an EMC filter is available on many articles for limiting electrical interference. The standard worm gear wheel is made from hardened plastic offering low noise and good performance.
Application
Agriculture
Building access
Care aid
Medical
Office equipment
Marine
General industrial automation
Agriculture
Building access
Care aid
Medical
Office equipment
Marine
General industrial automation