Recom RP20 AW Isolated DC-DC Converter, 5V dc/ 4A Output, 9 → 36 V dc Input, 20W, Through Hole, +90°C Max Temp
- RS Stock No.:
- 770-4352
- Mfr. Part No.:
- RP20-2405SAW
- Brand:
- Recom
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 770-4352
- Mfr. Part No.:
- RP20-2405SAW
- Brand:
- Recom
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Recom | |
| Output Voltage | 5V dc | |
| Input Voltage Range | 9 → 36 V dc | |
| Power Rating | 20W | |
| Input Voltage Nominal | 24 V dc | |
| Output Current | 4A | |
| Mounting Type | Through Hole | |
| Number of Outputs | 1 | |
| Isolation Voltage | 1.6kV dc | |
| Length | 25.4mm | |
| Depth | 9.9mm | |
| Railway Approved | Yes | |
| Series | RP20 AW | |
| Load Regulation | ±0.2% | |
| Maximum Temperature | +90°C | |
| Minimum Temperature | -55°C | |
Select all | ||
|---|---|---|
Brand Recom | ||
Output Voltage 5V dc | ||
Input Voltage Range 9 → 36 V dc | ||
Power Rating 20W | ||
Input Voltage Nominal 24 V dc | ||
Output Current 4A | ||
Mounting Type Through Hole | ||
Number of Outputs 1 | ||
Isolation Voltage 1.6kV dc | ||
Length 25.4mm | ||
Depth 9.9mm | ||
Railway Approved Yes | ||
Series RP20 AW | ||
Load Regulation ±0.2% | ||
Maximum Temperature +90°C | ||
Minimum Temperature -55°C | ||
- COO (Country of Origin):
- TW
Recom 20W Single/Dual Output Regulated Isolated DC-DC Converter - RP20-AW Serie
The Recom RP20-SAW series is an ultra miniature DC/DC converter, with wide input range power. These DC/DC converters have a case which is half the size of conventional industry standard 20W converters.
Even with their small size the RP20-SAW are fully specified devices, with output current up to 4.5A, up to 90% efficiency, no minimum load, 1600 V dc isolation, a built-in Class A EMC filter and low ripple/noise figures. These DC/DC converters are short circuit, over current and over voltage protected. The RP20-SAW has a very low no load input current of 4mA/6mA. Ideal for application with reduced board space and in battery powered systems where standby current is important.
Even with their small size the RP20-SAW are fully specified devices, with output current up to 4.5A, up to 90% efficiency, no minimum load, 1600 V dc isolation, a built-in Class A EMC filter and low ripple/noise figures. These DC/DC converters are short circuit, over current and over voltage protected. The RP20-SAW has a very low no load input current of 4mA/6mA. Ideal for application with reduced board space and in battery powered systems where standby current is important.
Ultra miniature Package
20 W Output Power
Single or Dual Outputs
Wide 4:1 Input Voltage Range
1.6kV dc Isolation
Fixed Operating Frequency
Built-in Class A EMC Filter
Six-Sided Continuous Shield
Industry Standard Pinout
Remote On/Off and Trim pins
Efficiency to 90%
20 W Output Power
Single or Dual Outputs
Wide 4:1 Input Voltage Range
1.6kV dc Isolation
Fixed Operating Frequency
Built-in Class A EMC Filter
Six-Sided Continuous Shield
Industry Standard Pinout
Remote On/Off and Trim pins
Efficiency to 90%
Standards
UL-60950-1