Cutting fluid from Dormer which are more environmentally friendly and less costly disposal option to hand applied cutting fluids for use on all metals.

Following options are available:
196-3457 – Supercut 340CF 340g bottle
196-3463 – Supercut 300 ml Aerosol
340-9573 - Supercut 5L can

Chlorine, phosphorous and sulphur-free
Mineral oil-free
Made from biodegradable ingredients
Non CFC/HCFC aerosol with low viscosity formula
Excellent cutting performance– produces better surface finish to the work piece
Excellent adhesion to tool
Can be used on all metals

Cutting fluids provide lubrication and cooling and are generally applied while the machining or cutting operation is taking place. The fluid cools the work piece and tool by carrying away the heat generated during machining. This fluid acts as lubricant at the friction areas, which increases the tool life. Examples of operations where cutting fluids are used include:
Drilling
Broaching
Milling
Threading

FAQs
Why can’t water be used as a cutting fluid?
Cutting fluid is used to cool the cutter down and lubricate the cutting surface. If water is used it will boil off and it will not lubricate. Water will also cause corrosion problems for the cutter.