Texas Instruments Analogue, Bidirectional Current Sensing Amplifier Single 16-Pin TSSOP
- RS Stock No.:
- 168-4959
- Mfr. Part No.:
- INA250A3PW
- Brand:
- Texas Instruments
Stock information currently inaccessible
- RS Stock No.:
- 168-4959
- Mfr. Part No.:
- INA250A3PW
- Brand:
- Texas Instruments
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Product Type | Current Sensing Amplifier | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 36V | |
| CMRR - Common Mode Rejection Ratio | 106dB | |
| Number of Channels | 1 | |
| Supply Current | 15A | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Pin Count | 16 | |
| GBP - Gain Bandwidth Product | 35kHz | |
| Minimum Operating Temperature | -40°C | |
| Length | 5.1mm | |
| Height | 1.05mm | |
| Standards/Approvals | No | |
| Series | INA250 | |
| Output Type | Analogue, Bidirectional | |
| Automotive Standard | AEC-Q100 | |
| Maximum Operating Temperature | 125°C | |
| Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Product Type Current Sensing Amplifier | ||
Power Supply Type Single | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 36V | ||
CMRR - Common Mode Rejection Ratio 106dB | ||
Number of Channels 1 | ||
Supply Current 15A | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Pin Count 16 | ||
GBP - Gain Bandwidth Product 35kHz | ||
Minimum Operating Temperature -40°C | ||
Length 5.1mm | ||
Height 1.05mm | ||
Standards/Approvals No | ||
Series INA250 | ||
Output Type Analogue, Bidirectional | ||
Automotive Standard AEC-Q100 | ||
Maximum Operating Temperature 125°C | ||
- COO (Country of Origin):
- MY
Current Sense Amplifiers Analogue Output, Texas Instruments
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.