Bel-Stewart Hand Ratcheting Crimp Tool for RJ45 Connectors
- RS Stock No.:
- 413-415
- Mfr. Part No.:
- 2980075-01
- Brand:
- Bel-Stewart
37 In stock - FREE next working day delivery available
4 available from Europe for delivery within 1 working day(s).
Price Each
£454.79
(exc. VAT)
£545.75
(inc. VAT)
Units | Per unit |
---|---|
1 - 4 | £454.79 |
5 + | £442.16 |
- RS Stock No.:
- 413-415
- Mfr. Part No.:
- 2980075-01
- Brand:
- Bel-Stewart
Technical Reference
Legislation and Compliance
Product Details
Cat 6 Shielded Termination Tool Kit
The Bell Stewart 2980075-01 is a high-quality tool designed for professionals and serious DIY enthusiast. Made from the best quality materials offer a long life and hassle-free operation. This Professional hand tool has been designed for the assembly of shielded Cat 6 plugs. It features a parallel action, full cycling, ratchet crimp action with a manual release. Also, the thumbscrew allows for a quick and easy die changes.
Features and Benefits:
A highly durable hand tool designed for professional use
Made from high-quality, lightweight materials. Weights only 460 g
Compact size (210 mm x 60 mm)
One-Step function allow contacts and shield to be crimped at the same time
Typical Applications:
Maintenance & repair
Electrical Installations
Cable assemblies
FAQ's:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
Features and Benefits:
A highly durable hand tool designed for professional use
Made from high-quality, lightweight materials. Weights only 460 g
Compact size (210 mm x 60 mm)
One-Step function allow contacts and shield to be crimped at the same time
Typical Applications:
Maintenance & repair
Electrical Installations
Cable assemblies
FAQ's:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
Specifications
Attribute | Value |
---|---|
Product Type | Crimp Tool |
Operation | Hand |
For Use With | RJ45 Connectors |
Ratcheting | Yes |
Related links
- Bel-Stewart Hand Ratcheting Crimp Tool Frame
- Ideal Hand Ratcheting Crimp Tool for RJ11 Connectors, RJ45 Connectors
- Fluke Networks Hand Ratcheting Crimp Tool for RJ11 Connectors,...
- RS PRO Hand Ratcheting Crimp Tool for RJ45 Connectors
- CK 3852 Hand Ratcheting Crimp Tool for RJ11 Connectors, RJ12...
- Cinch Hand Ratcheting Crimp Tool for RJ45 Connectors
- CAE Multimedia Connect Hand Ratcheting Crimp Tool for RJ45 Connectors
- Bel-Stewart Crimping Die Set