End Cap for use with 5ST3 7 MCB

  • RS Stock No. 521-4636
  • Mfr. Part No. 5ST3750
  • Brand Siemens
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specifications
Attribute Value
Accessory Type End Cap
Range Sentron
For Use With 5ST3 7 MCB
91 in stock for FREE next working day delivery
266 available from Europe for delivery within 1 working day(s)
Price Each
£ 1.36
(exc. VAT)
£ 1.63
(inc. VAT)
Units
Per unit
1 +
£1.36
Related Products
Ensures that cable ends are waterproof and permits ...
Description:
Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the cable and on application of heat the cap shrinks to ...
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication systems, transportation (rail) and power supplies.IEC classification S/HMMounting hole size. ...
PCB, single hole mountingSub-miniature, double insulatedTrip free mechanismSlow ...
Description:
PCB, single hole mountingSub-miniature, double insulatedTrip free mechanismSlow response time (typically 30 seconds at twice nominal current rating) ideal for inductive/reactive loadsTypical life 5000 operations (0.5 to 3A)/1000 operations (4 and 5A) at twice nominal current ratingMainly for motors, transformers and power suppliesIEC Classification R/TO.
3/8 inch or M12 (mm) moulded thread-neck single-hole ...
Description:
3/8 inch or M12 (mm) moulded thread-neck single-hole panel mounting6.3-0.8 mm blade terminalsSmall physical sizeTease free, Trip free mechanism for long lifePush to release/push to resetOn/off status indicationOverload and short circuit protectionTypical life 5000 operation at twice nominal current ratingMainly for motors, transformers, power supplies and extra low voltage systemsIEC ...