Schneider Electric LC1D Series Contactor, 110 V ac Coil, 3-Pole, 65 A, 30 kW, 3NO, 690 V ac

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Pick up this contactor from Schneider Electric to relay energy to your industrial equipment. It's a sturdy choice with a 30kW power rating to supercharge your workflow. Three poles and two auxiliary contacts offer easy joining potential to create an electrical network that boosts productivity. Compact dimensions of 122 (L) x 120 (D) x 55mm (W) save space, while easy-to-wire screw terminals achieve a firm hold, even in vibrating conditions. This assembly is heat resistant to +850°C to avoid a meltdown in the event of a fire.

• IP20-rated front face means that it's touch-proof and resistant to dust or objects bigger than 12mm
• Clips onto a DIN rail or screws onto a plate to make setup straightforward and speedy
• Free from mercury and other toxic heavy metals for an environmentally friendly choice that's safe to handle

• Industrial motor operation
• Automated processing
• Manufacturing facilities

Yes. This product has a broad operating temperature range between -5°C and +60°C, so it withstands the demands of harsh industrial conditions.

CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1.

UL, GOST, CSA, CCC.