Name: Schneider Electric TeSys F LC1F Contactor, 3-Pole, 630 A, 400 kW, 3NO, 1 kV ac
Brand: Schneider Electric
SKU: 609-0071
Price: 5074.14 GBP
Availability: Discontinued

Schneider Electric Contactors - LC1D TeSys D Series

Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• North American and International terminal markings

• Panel mounted with supplied screws

• Bidirectional peak limiting diode suppressor to protect the coil

• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL

• Easily installed accessories

• Flexible control circuit to suit a wide range of applications

• For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Applications:

• Industrial control systems
• Switching contractors or relay coils
• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.

Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation and maintenance

The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?

Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Select all	Attribute	Value
	Brand	Schneider Electric
	Number of Poles	3
	Contact Voltage Rating	1 kV ac
	Contact Current Rating	630 A
	Range	TeSys F
	Power Rating	400 kW
	Series	LC1F
	Normal State Configuration	3NO
	Terminal Type	Screw
	Length	304mm
	Width	309mm
	Depth	255mm
	Better World Product	Yes
	Better World Verification	Green Premium
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	+55°C

	Select all
	Brand Schneider Electric
	Number of Poles 3
	Contact Voltage Rating 1 kV ac
	Contact Current Rating 630 A
	Range TeSys F
	Power Rating 400 kW
	Series LC1F
	Normal State Configuration 3NO
	Terminal Type Screw
	Length 304mm
	Width 309mm
	Depth 255mm
	Better World Product Yes
	Better World Verification Green Premium
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature +55°C

Schneider Electric TeSys F LC1F Contactor, 3-Pole, 630 A, 400 kW, 3NO, 1 kV ac

Better World

Alternative