TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

When you need a reliable way to turn your circuits on and off, switch to this contactor from Schneider Electric. A current rating of 38A means it's a reliable choice for high-power systems. The unit comes with two built-in auxiliary contacts that boost its switching capability, so you can hook it up to a monitoring or control device to meet your system's needs. Screw-clamp terminals make installation quick and ensure your conductors don't come loose, even in shaky settings.

• Mechanical durability of 15 million cycles for long-lasting performance
• IP20 rating means it's finger-safe and protected against objects larger than 12mm
• Comes with a protective cover to prevent tampering
• Broad operating temperature range of -40°C to +60°C for use in demanding environments
• Light weight of 380g to put minimal strain on your equipment

• HVAC systems
• Conveyor belts
• Industrial pumps
• Automotive engineering

It has an opening time between 4 and 19ms and a closing time between 12 and 22ms, so it gives you the rapid-fire switching needed for speedy circuit control.

LROS (Lloyds register of shipping), CSA, UL, GOST, DNV, CCC, GL, BV, RINA, UKCA.

CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1.