TE Connectivity MATE N LOK Series Wire Seal IP56 Rated

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TE Connectivity Universal Mate-N-Lok Connector Wire Seals

TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board connections.

To achieve sealing it is necessary to use one interface seal and two wire seals per connector
Crimp contacts stock no. 366-4376 or 366-4382 must be used with these seals
Available in 2 to 15 way versions

Note

Refer to stock number 366-1901 and range for interface seals.

Approvals

CSA

TE Connectivity Universal MATE-N-LOK™ Range

Specifications
Attribute Value
Type Wire Seal
Series MATE N LOK
IP Rating IP56
Material Silicone
490 In stock for FREE next working day delivery
Price Each (In a Pack of 10)
£ 0.46
(exc. VAT)
£ 0.55
(inc. VAT)
Units
Per unit
Per Pack*
10 - 190
£0.46
£4.60
200 - 740
£0.40
£4.00
750 - 2990
£0.34
£3.40
3000 - 5990
£0.29
£2.90
6000 +
£0.276
£2.76
*price indicative
Related Products
A range of accessories for the Econoseal J ...
Description:
A range of accessories for the Econoseal J Mark II (+) series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cables Though designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed.
HDSCS connectors for use in commercial and off-road ...
Description:
HDSCS connectors for use in commercial and off-road vehicles applications. These HDSCS automotive connectors have rugged thermoplastic housings and are designed to withstand tough and harsh environments and high levels of vibration. The sealing provides IP67 protection against dust and water. This robust construction ensures high performance, reliability and long-term ...
The panel mount dimensions are such that mounting ...
Description:
The panel mount dimensions are such that mounting interchangeability is possible with MIL-C-5015 connector sizes (see Compatibility table). The plugs may be front or rear mounted, with a maximum of 4mm panel thickness. Contacts are rear insert, and are held in place by the shells locking retention plate, they are ...
Contacts for standard density connectors (1.6mm diameter) and ...
Description:
Contacts for standard density connectors (1.6mm diameter) and high density connectors (1.0mm diameter).Blanking pins are available for filling unused 1.6mm cavities.Use Crimp Tool stock no. 194-2264 for 1.0 and 1.6mm contacts.,Alternatively use Universal Crimp Tool Frame stock no. 848-391 with Die Set stock no. 158-8955 (for 1.6mm contacts only).