- RS Stock No.:
- 808-6964
- Mfr. Part No.:
- KSZ8441HLI-EVAL
- Brand:
- Micrel
Discontinued product
- RS Stock No.:
- 808-6964
- Mfr. Part No.:
- KSZ8441HLI-EVAL
- Brand:
- Micrel
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- US
Product Details
Evaluation Board for KSZ8441 Ethersynch™ Ethernet Switch
Micrels KSZ8441HL Evaluation Board offers a platform that will allow you to evaluate and test the KSZ8441HL (792-4458 ) Ethersynch™ IEEE 1588v2 10/100 Controller with generic host bus interface.
The Micrel Ethersynch™ technology is an energy efficient solution that will let you integrate Ethernet communications, IEEE 1588v2 Precision Time Protocol (PTP) products and precision GPIO.
The KSZ8441HL Evaluation Board kit includes the following: Evaluation Board, Evaluation Board Users Guide and Evaluation Board Schematic.
The Micrel Ethersynch™ technology is an energy efficient solution that will let you integrate Ethernet communications, IEEE 1588v2 Precision Time Protocol (PTP) products and precision GPIO.
The KSZ8441HL Evaluation Board kit includes the following: Evaluation Board, Evaluation Board Users Guide and Evaluation Board Schematic.
IEEE 1588 Precision Time Protocol 10/100 Ethernet End Point
Ethernet LAN Interface with RJ45 jack
Auto MDI/MDI-X for automatic detection and correction
8/16 bit parallel host processor interface
On-board 3.3V and 1.8V/2.5V regulators
Configurable for VDDIO of 3.3V, 2.5V, or 1.8V operation
Serial port interface for EEPROM
On-board 25 MHz crystal
100BASE-FX fibre interface (optional)
Line side and chip side over-voltage protection (optional)
Jumpers for power up configuration of the device
Jumpers for GPIO pins, I/O voltage selection and serial-port connections
Voltage supply; 5V DC voltage
Reset switch, test points, LED indicators
Ethernet LAN Interface with RJ45 jack
Auto MDI/MDI-X for automatic detection and correction
8/16 bit parallel host processor interface
On-board 3.3V and 1.8V/2.5V regulators
Configurable for VDDIO of 3.3V, 2.5V, or 1.8V operation
Serial port interface for EEPROM
On-board 25 MHz crystal
100BASE-FX fibre interface (optional)
Line side and chip side over-voltage protection (optional)
Jumpers for power up configuration of the device
Jumpers for GPIO pins, I/O voltage selection and serial-port connections
Voltage supply; 5V DC voltage
Reset switch, test points, LED indicators
Ethernet Communications - Microchip
Specifications
Attribute | Value |
---|---|
Kit Classification | Evaluation Board |
Kit Name | EtherSynch PTP |
- RS Stock No.:
- 808-6964
- Mfr. Part No.:
- KSZ8441HLI-EVAL
- Brand:
- Micrel