Analog Devices AD5700-1 Evaluation Kit EVAL-AD5700-1EBZ
- RS Stock No.:
- 786-2997
- Mfr. Part No.:
- EVAL-AD5700-1EBZ
- Brand:
- Analog Devices
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 786-2997
- Mfr. Part No.:
- EVAL-AD5700-1EBZ
- Brand:
- Analog Devices
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Analog Devices | |
| Kit Classification | Evaluation Kit | |
| Featured Device | AD5700-1 | |
Select all | ||
|---|---|---|
Brand Analog Devices | ||
Kit Classification Evaluation Kit | ||
Featured Device AD5700-1 | ||
Evaluation Board for FSK AD5700/AD5700-1 HART® Modem
Convenient connections for power through screw Terminal block
Use of on-chip RC oscillator or an external crystal Various link options
Use of on-chip RC oscillator or an external crystal Various link options
AD5700 Low Power HART® Modem
The AD5700 is a Low Power HART® FSK half-duplex Modem, complying with the HART® physical layer requirements
The AD5700-1 is a Low Power HART® Modem with Precision Internal Oscillator
Iintegrates all of the necessary filtering, signal detection, modulating, demodulating and signal generation functions
Requires few external components
The maximum supply current consumption of 115μA
Transmit waveforms are phase continuous 1200Hz and 2200Hz sinusoids
Contains accurate carrier detect circuitry and uses a standard UART interface
Small 4 x 4 mm package housing
The AD5700-1 is a Low Power HART® Modem with Precision Internal Oscillator
Iintegrates all of the necessary filtering, signal detection, modulating, demodulating and signal generation functions
Requires few external components
The maximum supply current consumption of 115μA
Transmit waveforms are phase continuous 1200Hz and 2200Hz sinusoids
Contains accurate carrier detect circuitry and uses a standard UART interface
Small 4 x 4 mm package housing
HART Modem Communications
A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.
Related links
- Wurth Elektronik EV-Kit Elara-I Elara-I Evaluation Kit for Elara-I EVAL Kit 2613019037001
- Microchip High-Speed 10/100 EEE enabled Ethernet Transceiver Customer Eval LAN8740/41 Evaluation Kit EVB8740
- Wurth Elektronik EV-Kit Erinome-I Erinome-I Evaluation Kit for Erinome-I EVAL Kit 2614019037001
- Infineon EZ-BLE PSOC™ Evaluation Board Bluetooth Evaluation Kit for CY8CKIT-042-BLE Bluetooth Low Energy Pioneer Kit,
- Analog Devices AD9910 Direct Digital Synthesiser (DDS) Evaluation Kit AD9910/PCBZ
- Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ
- Infineon Evaluation Kit CYBT-253059-EVAL Bluetooth Evaluation Board for CYW20820 2.4GHz CYBT-253059-EVAL
- Infineon Evaluation Kit CYBT-423054-EVAL Bluetooth Evaluation Board for CYW20719 2.4GHz CYBT-423054-EVAL