STMicroelectronics Sub-1 GHz 868 MHz RF Expansion Board Based on S2-LP Radio for STM32 Nucleo X-NUCLEO-S2868A1 Wireless

View this category
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
RS Stock No.:
182-7798
Mfr. Part No.:
X-NUCLEO-S2868A1
Brand:
STMicroelectronics
Find similar products by selecting one or more attributes.
Select all

Brand

STMicroelectronics

RF Technology

Wireless

Classification

Expansion Board

Kit Classification

Expansion Board

For Use With

Arduino UNO R3 Connector, STM32 Nucleo

Featured Device

X-NUCLEO-S2868A1

Frequency

1GHz

Kit Name

Sub-1 GHz 868 MHz RF Expansion Board Based on S2-LP Radio for STM32 Nucleo

COO (Country of Origin):
IT
The X-NUCLEO-S2868A1 expansion board is based on the S2-LP radio and operates in the 868 MHz ISM frequency band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. The X-NUCLEO-S2868A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins. You can change some of the GPIOs by mounting or removing the resistors.

Based on S2-LP radio
S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860 - 940 MHz frequency band
Programmable RF output power up to +16 dBm
Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
Air data rate from 0.1 to 500 kbps
Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm
RX and TX 128 byte FIFO buffers
Support to wireless M-Bus
Excellent performance of receiver sensitivity (up to -130 dBm)
Automatic acknowledgement, retransmission and timeout protocol engine
Compatible with STM32 Nucleo boards
Compatible with Arduino UNO R3 connectors
Support to SMD and SMA antennas
BALF-SPI2-01D3 IPD balun for matching network and harmonics filter
Sigfox compatible
Sample firmware for P2P communication
6LoWPAN compatible thanks to STM32Cube