RS PRO, Plug Cable Mount N Connector, 50Ω, Solder Termination, Straight Body

The RS Pro straight cable mount bulkhead fitting N-type, male connector has applied panel thickness of 0.327in. The low PIM connector is ideal where PIM (Passive Inter-modulation Distortion) is a concern for the design work. The centre contact has to be assembled with the cable inner conductor by soldering and the nut can be clamped on the cable for transmission and fixing. It is used with BELDEN 9913 and LMR400 cables.

• Beryllium copper contact
• Bronze body
• Gold contact plating
• Impedance is 50ohm
• Low loss connection
• Operating frequency is 11GHz
• Operating temperature ranges between -40°C and 85°C
• Solder termination method
• Threaded mating
• Waterproof

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007