Dust caps for plugs and sockets protecting the connectors from water, dirt and damage, when they are not connected.

Will remain attached with rubber eyelet arrangement
IP67 when connected

Protect your connectors from environmental hazards with this weatherproof Brad from Molex dust cap. It's made of durable and impact-resistant nylon material, so it can withstand repeated use. It has a rubber lanyard that you can use to attach it to the receptacle, so it's always within reach and won't get lost. The cap has a knurled grip to make tightening and loosening easy. You'll find components like this frequently used in factories and manufacturing plants where equipment is exposed to dust and dirt.

• IP67 (ingress protection) rating means it's dust-tight and able to withstand 30 minutes immersion in 1m of water
• Practical black colour

• Installation and commissioning sites
• Workshops
• Manufacturing plants

This dust cap is UV (ultraviolet) stable, which means it's unaffected by ultraviolet light such as the sun's rays. That means you can use it safely under direct sunlight.

The overall length, measured from the middle of the dust cap to the middle of the lanyard hole, is 91mm. The width of the lanyard hole is 25.5mm. The dust cap has an overall diameter of 28.6mm and a thickness of 13mm.

BRAD Range

Fully sealed (rated IP67) RJ45 connectors for use in environmentally demanding applications
Overmoulded and bonded envelopes protect data transmission in harsh applications against water, oil and dust ingress both for internal and external use
Connectors perform to category 5e standards and are available in shielded versions particularly suitable in electrically noisy environments