ITT Cannon Circular Connector Backshell
- RS Stock No.:
- 167-9742
- Mfr. Part No.:
- TNA16CC-HC00L / 192900-0497
- Brand:
- ITT Cannon
Bulk discount available
Subtotal (1 unit)*
£12.22
(exc. VAT)
£14.66
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 626 unit(s) ready to ship
- Plus 1 unit(s) ready to ship from another location
- Plus 100 unit(s) shipping from 09 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
1 - 19 | £12.22 |
20 - 39 | £10.99 |
40 + | £9.89 |
*price indicative
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£8.47
(exc. VAT)
£10.16
(inc. VAT)
- RS Stock No.:
- 167-9742
- Mfr. Part No.:
- TNA16CC-HC00L / 192900-0497
- Brand:
- ITT Cannon
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | ITT Cannon | |
Length | 89.8mm | |
Select all | ||
---|---|---|
Brand ITT Cannon | ||
Length 89.8mm | ||
- COO (Country of Origin):
- HU

ITT Cannon Backshell
The ITT Cannon Trident Neptune series backshell is a circular connector with 16 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, it features a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, it features a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Features and Benefits
Durability of 500 mating cycles
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage is up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage is up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Related links
- ITT Cannon Circular Connector Backshell
- ITT Cannon For Use With Neptune Circular
- ITT Cannon Black Sealed Cable Clamp, Shell Size 10mm for use with Trident Connectors
- ITT Cannon For Use With DL1 / DLM1
- ITT Cannon For Use With Unsealed plugs and Receptables, 12
- ITT Cannon For Use With QM Range Connector, 23
- ITT Cannon For Use With QM Range Connector, 7
- ITT Cannon For Use With APD Series