The EPR-01 is designed to read, copy and program EPROMs (27xxx and 27Cxxx families) and parallel EEPROMs (28Cxxx family) of 24 to 28 pins. The available programming voltages are 12.5V, 21V and 25V based on its integrated set-up transformer. The EPR-01 board connects to the parallel port of any compatible PC and it is equipped with a 28-pin socket allowing you to program different devices. The EPR-01 is protected against polarity reversals, over-voltage and short circuits. The EPR-01 works with the software Smartchip under Windows 98/ME/2000/XP.
Read, Write, Program, Verify, Blank-Check, and Erase functions Support high Vpp programming voltage: 12.5V, 21V, 25V There is no need for external power adapter for all package devices: DIP24 and DIP28 Works with the software Smartchip under WIndows 98/ME/2000/XP (32-bit) Interface connection to a computer through the parallel port in ECP mode Requires an unregulated continuous power adaptor 9Vdc at 500mA (not included) Board Dimensions: 110x115x23mm, Weight: 100g
Kit Contents
Programmer with DIP28 wide package Parallel cable Software on CD-ROM User manual in English and French
The EPR-01 is designed to read, copy and program EPROMs (27xxx and 27Cxxx families) and parallel EEPROMs (28Cxxx family) of 24 to 28 pins. The available programming voltages are 12.5V, 21V and 25V based on its integrated set-up transformer. The EPR-01 board connects to the parallel port of any compatible PC and it is equipped with a 28-pin socket allowing you to program different devices. The EPR-01 is protected against polarity reversals, over-voltage and short circuits. The EPR-01 works with the software Smartchip under Windows 98/ME/2000/XP.
Read, Write, Program, Verify, Blank-Check, and Erase functions Support high Vpp programming voltage: 12.5V, 21V, 25V There is no need for external power adapter for all package devices: DIP24 and DIP28 Works with the software Smartchip under WIndows 98/ME/2000/XP (32-bit) Interface connection to a computer through the parallel port in ECP mode Requires an unregulated continuous power adaptor 9Vdc at 500mA (not included) Board Dimensions: 110x115x23mm, Weight: 100g
Kit Contents
Programmer with DIP28 wide package Parallel cable Software on CD-ROM User manual in English and French