Microchip MCP2551-E/P, CAN Transceiver 1Mbps ISO 11898, 8-Pin PDIP
- RS Stock No.:
- 177-1626
- Mfr. Part No.:
- MCP2551-E/P
- Brand:
- Microchip
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 177-1626
- Mfr. Part No.:
- MCP2551-E/P
- Brand:
- Microchip
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| Standard Supported | ISO 11898 | |
| IC Type | CAN Transceiver IC | |
| Maximum Supply Current | 75 mA | |
| Mounting Type | Through Hole | |
| Package Type | PDIP | |
| Pin Count | 8 | |
| Dimensions | 0.4 x 0.28 x 0.19in | |
| Length | 10.16mm | |
| Width | 7.11mm | |
| Height | 4.83mm | |
| Maximum Operating Supply Voltage | 5.5 V | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Supply Voltage | 4.5 V | |
| Minimum Operating Temperature | -40 °C | |
Select all | ||
|---|---|---|
Brand Microchip | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
Standard Supported ISO 11898 | ||
IC Type CAN Transceiver IC | ||
Maximum Supply Current 75 mA | ||
Mounting Type Through Hole | ||
Package Type PDIP | ||
Pin Count 8 | ||
Dimensions 0.4 x 0.28 x 0.19in | ||
Length 10.16mm | ||
Width 7.11mm | ||
Height 4.83mm | ||
Maximum Operating Supply Voltage 5.5 V | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Supply Voltage 4.5 V | ||
Minimum Operating Temperature -40 °C | ||
- COO (Country of Origin):
- US
Microchip Technology CAN Transceiver
The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local Interconnect Network (LIN) bus supports communication in automotive networks.
Features and Benefits
• An unpowered node or brown out event will not disturb the CAN bus
• Automatic thermal shutdown protection
• Detection of ground fault (permanent dominant) on TXD input
• Externally controlled slope for reduced RFI emission
• High noise immunity due to differential bus implementation
• Implements ISO-11898 standard physical layer requirements
• Low current stand by operation
• O extended (E):-400C to 1250C
• O industrial (I):-400C to 850C
• Power on reset and voltage brown out protection
• Protection against damage due to short circuit conditions (positive or negative battery voltage)
• Protection against high voltage transients
• Suitable for 12V and 24V systems
• Temperature ranges
• Up to 112 nodes can be connected
• Automatic thermal shutdown protection
• Detection of ground fault (permanent dominant) on TXD input
• Externally controlled slope for reduced RFI emission
• High noise immunity due to differential bus implementation
• Implements ISO-11898 standard physical layer requirements
• Low current stand by operation
• O extended (E):-400C to 1250C
• O industrial (I):-400C to 850C
• Power on reset and voltage brown out protection
• Protection against damage due to short circuit conditions (positive or negative battery voltage)
• Protection against high voltage transients
• Suitable for 12V and 24V systems
• Temperature ranges
• Up to 112 nodes can be connected