Brady Tag Cable Markers, Yellow, Pre-printed "0 → 9", for BMP71, TLS-PC LINK, PTDSU-15-7596-YL
- RS Stock No.:
- 410-3614
- Mfr. Part No.:
- PTDSU-15-7596-YL
- Brand:
- Brady
Image representative of range
Unavailable
RS will no longer stock this product.
Alternative
This product is not currently available. Here is our alternative recommendation.
1 Box of 2500
£53.54
(exc. VAT)
£64.25
(inc. VAT)
- RS Stock No.:
- 410-3614
- Mfr. Part No.:
- PTDSU-15-7596-YL
- Brand:
- Brady
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Brady | |
| Affixing Method | Tag | |
| Legend | 0 → 9 | |
| Maximum Cable Diameter | 10mm | |
| Colour | Yellow | |
| Length | 4.2mm | |
| Width | 15 mm | |
| Quantity | 2500 | |
| Printable | No | |
| Material | Vinyl | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Resistant To | Humidity, UV | |
| Operating Temperature Range | -40 → +100 °C | |
| For Use With | BMP71, TLS-PC LINK | |
| Select all | ||
|---|---|---|
Brand Brady | ||
Affixing Method Tag | ||
Legend 0 → 9 | ||
Maximum Cable Diameter 10mm | ||
Colour Yellow | ||
Length 4.2mm | ||
Width 15 mm | ||
Quantity 2500 | ||
Printable No | ||
Material Vinyl | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
Resistant To Humidity, UV | ||
Operating Temperature Range -40 → +100 °C | ||
For Use With BMP71, TLS-PC LINK | ||
- COO (Country of Origin):
- BE
DURASLEEVES markers for TLS2200 printers
Non-adhesive, repositionable and heat-transfer printed, DURASLEEVE is an ideal solution for electrical wire marking.
The label stays attached to the roll, thereby facilitating insertion in the label holder.
Compatible with most label holders.
Used for various types of cabinets (instrumentation and control panels).
The label holder is not clipped, but rather slides onto the wire.
The label stays attached to the roll, thereby facilitating insertion in the label holder.
Compatible with most label holders.
Used for various types of cabinets (instrumentation and control panels).
The label holder is not clipped, but rather slides onto the wire.