From Lapp, these blanking plugs are used to close over pre-drilled threaded bore holes. If a cable opening in a panel, junction box or machine housing has become redundant, these blanking plugs can be used to seal the bore hole, and have a simple screw-on action.

They feature a robust nickel plated brass construction, and have a good degree of resistance against corrosion and temperature for a low-maintenance cable management solution.

Ensuring a low level of environmental resistance (or higher when coupled with an o-ring) these blind plugs have far more use than the merely aesthetic, and can help protect wiring and machinery components.

Features and Benefits

• Nickel-plated Brass Construction
• IP54 Protection (IP68 when used with appropriate o-ring)
• Corrosion Resistance
• Temperature Resistance
• PG Sizes

Applications
These blind plugs can be used in;

• Electric Motor Manufacturing
• Machine Manufacturing

Accessories

These blind plugs can be used with corresponding Lapp o-rings for added environmental sealing.

• 664-4609 are M 12 x 1.5mm O-Rings
• 664-4606 are M 12 x 2.0mm O-Rings
• 664-4603 are M 16 x 1.5mm O-Rings
• 664-4612 are M 16 x 2.0mm O-Rings
• 664-4619 are M 20 x 1.5mm O-Rings
• 664-4615 are M 20 x 2.0mm O-Rings
• 664-4628 are M 25 x 2.0mm O-Rings
• 664-4621 are M 32 x 2.0mm O-Rings
• 664-4625 are M 40 x 2.0mm O-Rings
• 664-4634 are M 50 x 2.0mm O-Rings

Need to cover unused cable holes in panels and junction boxes? Keep contaminants out with this handy blanking plug from LAPP. It screws onto pre-drilled holes, so installation is quick and easy. The PG9 thread size means it's compatible with standard entry points on equipment. A slotted groove in the top makes it easy to tighten securely and remove with just a screwdriver.

• Wide operating temperature range between -60°C and +200°C, for use in harsh conditions
• Made from nickel-plated brass to be durable and resistant to corrosion

• Junction boxes
• Control panels
• Machine housing

This cable gland plug has an IP54 rating, so it protects against dust and splashes of water. Use it with an O-ring (664-4603) to increase this ingress protection to an IP68 rating.