Pillow Block Bearing NP20, 20mm ID

  • RS Stock No. 747-456
  • Mfr. Part No. NP20
  • Brand NSK-RHP
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Self-Lube Pillow Block Bearing

Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Supplied with full fitting instructions
C3 internal radial clearance
Slotted bolt holes

Supplied with

grease nipples.

//media.rs-online.com/t_line/LF747383-99.gif
Specifications
Attribute Value
Inside Diameter 20mm
Material Cast Iron
Centre Height 33.3mm
Mount Hole Size 10 mm
Length 127mm
Depth 32.5mm
Overall Height 65.2mm
Mount Hole Centre-to-Centre 100.5mm
22 In stock for FREE next working day delivery
Price Each
£ 19.87
(exc. VAT)
£ 23.84
(inc. VAT)
Units
Per unit
1 - 4
£19.87
5 - 9
£19.07
10 - 24
£18.68
25 +
£18.28
Related Products
Felt ring seals are simple but efficient seals ...
Description:
Felt ring seals are simple but efficient seals for use with grease lubrication. They can be operated at peripheral speeds of up to 4 m/s (800 ft/min). The seals can be used at higher speeds, but a small gap forms between the felt and the shaft. As a result the ...
Food Line Y-bearing units from SKF offer an ...
Description:
Food Line Y-bearing units from SKF offer an innovative solution to washroom-related problems such as corrosion and premature bearing failure. Productivity is increased by eliminating human error through grease misuse and preventing contamination. With less grease consumption, SKF Food Line Y-bearings eliminate the need for relubrication and reduce waste. • ...
Designed specifically for use in industries where frequent ...
Description:
Designed specifically for use in industries where frequent thorough wash-downs are necessary, optimum hygiene standards are required and chemical resistance is important over a wide temperature range. Available in pillow block, two bolt flange configurations and are capable of accomodating initial misalignment whilst mounting Relubrication is possible through the grease ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported.