Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.

Continuously rated
LED long life
Low current consumption
Dustproof
Weatherproof
Cable termination inside the enclosure
Deep or Shallow base options

Use this beacon from Moflash to give clear visual warnings on your industrial machinery. It uses 36 LEDs to project a bright light that's easy to see in most lighting conditions. The red lens colour gives a clear indication of an emergency situation or machine malfunction. Thanks to its maximum flash rate of 120FPM (flashes per minute), this beacon quickly attracts the attention of nearby personnel. For versatility, you can set the unit to flash continuously or emit a steady light using a jumper link on the PCB (printed circuit board).

• Acrylonitrile butadiene styrene (ABS) base material for resistance to impact and wear
• Low current consumption of 35mA at 230V AC for energy efficiency
• Broad operating temperature range of -25°C to +55°C for use in demanding conditions
• UV-stable polycarbonate (PC) lens won't fade in direct sunlight

• Commercial buildings
• Production plants
• Safety systems

This beacon has an IP65 (ingress protection) rating, so it's protected against dust and low-pressure water jets. This makes it suitable for use in damp environments.