Texas Instruments BQ24650RVAT, Lead-Acid, LiFePO4, Lithium-Ion, Lithium-Polymer, Battery Charge Controller 16-Pin, VQFN

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BQ24650, Switch-Mode Battery Charge Controller for Solar Power With Maximum Power Point Tracking (MPPT)

The bq24650 provides input voltage regulation, which reduces charge current when input voltage falls below a programmed level. The Charge Controller offers a constant-frequency synchronous PWM controller with high accuracy current and voltage regulation, charge pre-conditioning, charge termination, and charge status monitoring.

Maximum Power Point Tracking (MPPT) Capability by Input Voltage Regulation
Programmable MPPT Setting
5V-28V Input Solar Panel
600kHz NMOS-NMOS Synchronous Buck Controller
Resistor Programmable Float Voltage
Accommodates Li-Ion/Polymer, LiFePO4, Lead-Acid battery Chemistries

Battery Management, Texas Instruments

Specifications
Attribute Value
Battery Type Lead-Acid, LiFePO4, Lithium-Ion, Lithium-Polymer
Mounting Type Surface Mount
Package Type VQFN
Pin Count 16
Typical Operating Supply Voltage 5 → 28 V
Dimensions 3.6 x 3.6 x 0.95mm
Length 3.6mm
Height 0.95mm
Maximum Operating Temperature +85 °C
Width 3.6mm
Maximum Output Voltage 2.1 V
Minimum Operating Temperature -40 °C
14 In stock for FREE next working day delivery
Price Each
£ 4.09
(exc. VAT)
£ 4.91
(inc. VAT)
Units
Per unit
1 - 9
£4.09
10 - 49
£3.68
50 - 99
£3.55
100 - 499
£3.02
500 +
£2.61
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Packaging Options:
Related Products
The ISL78610 is a lithium-ion (Li-ion) battery pack ...
Description:
The ISL78610 is a lithium-ion (Li-ion) battery pack monitor. It provides cell balancing and accurate voltage and temperature monitoring. Up to 12-cell voltage monitors Cell voltage measurement accuracy ±10 m VInternal and external temperature monitoring Integrated system diagnostics for all key internal functions Integrated watchdog is able to activate shut ...
The STEVAL-ISB044V1 evaluation kit has been designed for ...
Description:
The STEVAL-ISB044V1 evaluation kit has been designed for devices, such as smartphones or tablets, requiring high power levels. It supports wireless battery charging up to 15 W. The embedded STWBC-EP digital controller transmitter is based on a cost-effective half-bridge topology providing external interfaces via UART and I²C. The kit also ...
The ISL94208 battery management IC is designed for ...
Description:
The ISL94208 battery management IC is designed for use with a microcontroller and features an analog front-end with overcurrent protection for multi-cell Li-ion battery packs. The ISL94208 supports battery packs consisting of four to six cells in series and one or more cells in parallel. Using an internal analog multiplexer, ...
The STC3115 includes the hardware functions required to ...
Description:
The STC3115 includes the hardware functions required to implement a low-cost gas gauge for battery monitoring. The STC3115 uses current sensing, Coulomb counting and accurate measurements of the battery voltage to estimate the state-of-charge (SOC) of the battery. An internal temperature sensor simplifies implementation of temperature compensation. An alarm output ...