10mm Angular Contact Ball Bearing 30mm O.D

  • RS Stock No. 174-1037
  • Mfr. Part No. 7200-B-XL-TVP
  • Brand FAG
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.

Radial and axial load capacity
Universal design
Matched bearings
Sealing
Lubrication
Operating temperature
Cages
Suffixes

Specifications
Attribute Value
Inside Diameter 10mm
Outside Diameter 30mm
Ball Bearing Type Angular Contact
Race Width 9mm
Number of Rows 1
Static Load Rating 2600N
Cage Material Polyamide
Race Type Plain
Dynamic Load Rating 5300N
3 In stock - FREE next working day delivery available
Price Each
£ 19.69
(exc. VAT)
£ 23.63
(inc. VAT)
Units
Per unit
1 - 4
£19.69
5 - 9
£18.90
10 - 24
£18.51
25 +
£18.12
Related Products
The BSN series of ball screw support bearings ...
Description:
The BSN series of ball screw support bearings are double row, angular contact thrust ball bearings, with a 60° contact angle. They are equivalent to two single row bearings in a back-to-back arrangement, with a single outer ring. Bearings are supplied ready to be mounted. They come greased with long ...
Bearing arrangements must support combined loads, i.e. radial ...
Description:
Bearing arrangements must support combined loads, i.e. radial and axial loads acting simultaneously Moderate to high axial loads are present on one side Rigid axial guidance is required The bearing arrangement must be axially clearance-free or preloaded High speeds are required under higher radial and axial loads The bearing arrangement ...
If there is skewing between the outer and ...
Description:
If there is skewing between the outer and inner ring (for the compensation of angular misalignments)For bearing arrangements with high radial loads For higher speeds on account of their point contact, than barrel roller bearings with line contact Where bearings with the above-mentioned characteristics are expected to run more quietly ...
The design envelope is not sufficient under high ...
Description:
The design envelope is not sufficient under high loads for a pair of single row angular contact ball bearings High radial and axial loads are acting simultaneously Tilting moments must also be supportedA relatively rigid bearing arrangement is required The bearing arrangement is to run quietly in addition to meeting ...