KEMET 22000μF Aluminium Electrolytic Capacitor 40V dc, PCB Mount - ALP22A223DD040
- RS Stock No.:
- 227-1175P
- Mfr. Part No.:
- ALP22A223DD040
- Brand:
- KEMET
Bulk discount available
Subtotal 5 units (supplied in a box)*
£65.25
(exc. VAT)
£78.30
(inc. VAT)
Stock information currently inaccessible
Units | Per unit |
|---|---|
| 5 - 24 | £13.05 |
| 25 - 49 | £12.71 |
| 50 - 74 | £12.38 |
| 75 + | £12.08 |
*price indicative
- RS Stock No.:
- 227-1175P
- Mfr. Part No.:
- ALP22A223DD040
- Brand:
- KEMET
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | KEMET | |
| Capacitance | 22000µF | |
| Voltage | 40V dc | |
| Mounting Type | PCB Mount | |
| Technology | Aluminium Electrolytic | |
| Dimensions | 40 x 55mm | |
| Length | 55mm | |
| Minimum Operating Temperature | -40°C | |
| Diameter | 40mm | |
| Maximum Operating Temperature | +85°C | |
| Lifetime | 26000 h @ +85 °C/40V dc/Ir | |
| Series | ALP22 | |
| Ripple Current | 5.6 A @ 100Hz | |
| Leakage Current | 5.28 mA | |
| Tolerance | -10 → +30% | |
| Polarised | Polar | |
| Equivalent Series Resistance | 36 mΩ @ 100 kHz | |
| Select all | ||
|---|---|---|
Brand KEMET | ||
Capacitance 22000µF | ||
Voltage 40V dc | ||
Mounting Type PCB Mount | ||
Technology Aluminium Electrolytic | ||
Dimensions 40 x 55mm | ||
Length 55mm | ||
Minimum Operating Temperature -40°C | ||
Diameter 40mm | ||
Maximum Operating Temperature +85°C | ||
Lifetime 26000 h @ +85 °C/40V dc/Ir | ||
Series ALP22 | ||
Ripple Current 5.6 A @ 100Hz | ||
Leakage Current 5.28 mA | ||
Tolerance -10 → +30% | ||
Polarised Polar | ||
Equivalent Series Resistance 36 mΩ @ 100 kHz | ||
ALP22 Series
Long life low ESR aluminium electrolytic capacitors incorporating a safety vent and insulating sleeve.
Additional PCB pins are intended for mechanical connection only. It is recommended that they be soldered to the printed circuit board on isolated pads
Additional PCB pins are intended for mechanical connection only. It is recommended that they be soldered to the printed circuit board on isolated pads
