onsemi, AC/DC Converter 1.05 A 78-Pin, PDIP NCP1079BBP130G
- RS Stock No.:
- 178-4343
- Mfr. Part No.:
- NCP1079BBP130G
- Brand:
- onsemi
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 178-4343
- Mfr. Part No.:
- NCP1079BBP130G
- Brand:
- onsemi
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 10V | |
| Output Power | 14W | |
| Mount Type | Through Hole | |
| Switching Frequency | 130kHz | |
| Pin Count | 78 | |
| Maximum Output Current | 1.05A | |
| Package Type | PDIP | |
| Minimum Input Voltage | -0.3V | |
| Topology | Flyback | |
| Minimum Operating Temperature | 150°C | |
| Maximum Duty Cycle | 72% | |
| Maximum Operating Temperature | 150°C | |
| Length | 9.37mm | |
| Series | NCP1079 | |
| Height | 3.43mm | |
| Standards/Approvals | No | |
| Supply Current | 1.1mA | |
| Automotive Standard | No | |
| Minimum Output Current | 400mA | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 10V | ||
Output Power 14W | ||
Mount Type Through Hole | ||
Switching Frequency 130kHz | ||
Pin Count 78 | ||
Maximum Output Current 1.05A | ||
Package Type PDIP | ||
Minimum Input Voltage -0.3V | ||
Topology Flyback | ||
Minimum Operating Temperature 150°C | ||
Maximum Duty Cycle 72% | ||
Maximum Operating Temperature 150°C | ||
Length 9.37mm | ||
Series NCP1079 | ||
Height 3.43mm | ||
Standards/Approvals No | ||
Supply Current 1.1mA | ||
Automotive Standard No | ||
Minimum Output Current 400mA | ||
The NCP1079A & NCP1079B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).
Up to 30W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage