The bq Witbox is a domestic printer with DIN-A4 print volume (21 x 29.7cm) and a height of up to 20 cm, meaning it has a greater capacity to print large-scale objects and multiple parts simultaneously than any other printer. Several factors affect the quality of 3D printing. One of them is the height of each layer: the lower the height, the better the level of detail and resolution of the printed object. It's also very important for the printing base to be as level as possible. A toughened, laminated* glass base is incorporated in Witbox.
Special Single Extruder SD-Controller with LCD Display Special 3-Point-Printbed (200mm x 200mm) Layerhight, adjustable: from 0,1mm up to 0,3mm Teflon-coated Fibonacci Filament Guiding System Rigid Metall-Housing with chrome coating Special printspace-door for safety CE safety certified
The bq Witbox has been painstakingly designed to optimise its functionality. Its a fully enclosed printer with a locking front door system, preventing accidental access during printing and making it a particularly safe to use around children.
Note
You can run Witbox printer with a variety of open source software such as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of use, greater compatibility and total technological independence.
* For optimum printing, lacquer must be sprayed on the base before you start printing
Basic technical competency is recommended for set up, use and on-going maintenance of this 3D printer throughout it's lifetime Do not leave your 3D Printer to print unattended. Any damage caused by unattended usage will void the warranty
Supplied with
Witbox 3D printer Print base Set of two keys Two side panels and one top panel USB cable Power cable Spool of PLA filament (1.75 mm) Metal spool-holder 4GB SD card (pre-loaded with sample 3D models) Sample printed object Four feet/underside supports Maintenance kit, comprising: One replacement Hot-End Two cleaning needles Three Allen keys (1.5, 2.5 and 4 mm)
Warning
3D Printers should not be left to print unattended.