Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Read more Read less

Filters

Viewing 61 - 80 of 245 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS Stock No. 124-6108
Mfr. Part No.TAH2101G-140
BrandBahco
£28.22
Each
Units
TAH2101G-140 - Side Cutter 140 mm 16mm - Yes - Alloy Steel 1.8 mm, 2 mm, 3.7 mm 3.7mm - - 2mm
RS Stock No. 248-1962
Mfr. Part No.74 91 250
BrandKnipex
£33.09
Each
Units
- - Semi-Flush 250 mm - - - - Chrome Vanadium Steel 5mm - - 3.8mm -
RS Stock No. 187-8292
Mfr. Part No.64 32 120
BrandKnipex
£37.27
Each
Units
- - Electronics End Cutting Nipper 120 mm 10mm - - - Tool Steel 1.5mm - - 0.5mm -
RS Stock No. 124-6109
Mfr. Part No.TAH2101G-160
BrandBahco
£28.57
Each
Units
TAH2101G-160 - Side Cutter 160 mm 18mm - Yes - Alloy Steel 2 mm, 2.5 mm, 3.8 mm 3.8mm - - 2.5mm
RS Stock No. 806-4901
Mfr. Part No.21HDG-140A
BrandBahco
£28.77
Each
Units
- - Side Cutter 140 mm 15.9mm - - - Alloy Steel 2.2mm - - - -
RS Stock No. 158-5366
Mfr. Part No.25 06 160
BrandKnipex
£23.04
Each
Units
- - Snipe Nose Cutting Pliers 160 mm 50mm - - - Vanadium Electric Steel 2.5mm - - 1.6mm -
RS Stock No. 187-8309
Mfr. Part No.64 42 115
BrandKnipex
£39.74
Each
Units
- - Electronics End Cutting Nipper 115 mm 10mm - - - Tool Steel 1.5mm - - 0.5mm -
RS Stock No. 755-4116
Mfr. Part No.425.MT
BrandFacom
£58.96
Each
Units
- - Electronics Diagonal Cutters 110 mm 13mm - - - - 1.3mm 0.1 → 1.3mm - - -
RS Stock No. 806-4904
Mfr. Part No.21HDG-160A
BrandBahco
£29.39
Each
Units
- - Side Cutter 160 mm 18mm - - - Alloy Steel 2.5mm - - - -
RS Stock No. 297-2654
Mfr. Part No.197
BrandStanley
£109.28
Each
Units
- - Diagonal 229 mm - - - - - 0.06in - - - -
RS Stock No. 288-910
Mfr. Part No.78 91 125 RS
BrandKnipex
£22.20
Each
Units
- - Electronics Diagonal Cutters 125 mm - - - - - - - - - -
RS Stock No. 910-7175
Mfr. Part No.T3888
BrandCK
£11.35
Each
Units
- - Electronics Diagonal Cutters 135 mm - - - Yes - - 1.6mm - - -
RS Stock No. 834-8016
Mfr. Part No.3-971-15
£42.90
Each
Units
- - Electronics Diagonal Cutters 125 mm - - - Yes Chrome Vanadium Steel 1.6mm - - 0.5mm -
RS Stock No. 297-1948
Mfr. Part No.26 17 200
BrandKnipex
£30.05
Each
Units
- - Snipe Nose Cutting Pliers 200 mm 73mm Yes - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS Stock No. 442-0931
Mfr. Part No.25 02 160 SB
BrandKnipex
£18.77
Each
Units
- - Snipe Nose Cutting Pliers 160 mm 50mm - - - Vanadium Electric Steel 2.5mm - - 1.6mm -
RS Stock No. 442-0925
Mfr. Part No.26 12 200 SB
BrandKnipex
£22.01
Each
Units
- - Snipe Nose Cutting Pliers 200 mm 73mm - - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS Stock No. 158-5344
Mfr. Part No.74 06 180
BrandKnipex
£34.07
Each
Units
- - VDE High Leverage Diagonal Cutters 180 mm - - - - - - - - - -
RS Stock No. 806-4926
Mfr. Part No.21HDG-200
BrandBahco
£37.91
Each
Units
- - Side Cutter 200 mm 19.8mm - - - Alloy Steel 3.2mm - - - -
RS Stock No. 794-7785
Mfr. Part No.412B.10
BrandFacom
£42.24
Each
Units
- - Cable Cutter 170 mm 40mm - - - - 10mm 10mm - - -
RS Stock No. 158-5568
Mfr. Part No.67 01 160 SB
BrandKnipex
£23.80
Each
Units
- - End Cutter 160 mm - - - - Chrome Vanadium Steel 4.5mm - - 2.5mm -
Related Products
High-quality diagonal cutting pliers with angled head for ...
Description:
High-quality diagonal cutting pliers with angled head for flush cuts. Manufactured from heat treated high chrome steel, with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a more comfortable controlled grip. Ideal for electronics work, cutting tempered steel such as piano wire, copper wire and aluminium. • ...
The TriCut electric installation pliers, designed for 3 ...
Description:
The TriCut electric installation pliers, designed for 3 practical functions; cutting, skinning and stripping. Featuring a specially angled head to ensure that cables are stripped and skinned lengthwise along the cable. Using an ergonomic approach, which saves users from applying excessive force. TriCut pliers offer a distinct advantage over other ...
VDE Insulated diagonal cutters designed for professionals working ...
Description:
VDE Insulated diagonal cutters designed for professionals working with electrical components. These professional BiCut industrial cutting pliers, give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job of two pairs of pliers. Giving you a comfortable control ...
Straight half-round, long jaws with serrated gripping surfaces ...
Description:
Straight half-round, long jaws with serrated gripping surfaces Cutting capacity - medium hard wire 3.2mm Ø, hard wire 2.2mm ØCutting edges additionally induction hardened, hardness approx. 61 HRC Made from vanadium steel, oil-hardened and tempered Chrome-plated head, two-colour two-component handles, VDE-tested conforming to IEC 900. 1000 V.