Needle Point Probes

Filters

Viewing 61 - 67 of 67 products
Results per page
Description Price Voltage Rating Current Rating Colour Probe Tip Type Tip Size Tip Material Probe Socket Diameter Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 714-8203
Mfr. Part No.BU-26101-2
£11.06
Each
Units
1kV 20A Red Fixed 2mm Stainless Steel - - -
RS Stock No. 884-9103
Mfr. Part No.973659100
£2.73
Each
Units
30 V ac, 60 V dc - Black Needle 2mm Stainless Steel 4mm +80°C -25°C
RS Stock No. 175-8889
Mfr. Part No.931376101
£4.34
Each
Units
60V dc - Red Fixed 1mm Stainless Steel 2mm +60°C -25°C
RS Stock No. 789-4708
Mfr. Part No.SPS 2381 Ni / SW
£11.54
Each
Units
1kV - Black Spring Loaded 2 mm, 2.4 mm Steel 4mm +90°C -25°C
RS Stock No. 714-8200
Mfr. Part No.BU-26101-0
£11.06
Each
Units
1kV 20A Black Fixed 2mm Stainless Steel - - -
RS Stock No. 103-7407
Mfr. Part No.66.9112-24
BrandHCK
£4.79
Each
Units
- - - - - - - - -
RS Stock No. 2550366926
Mfr. Part No.1803A.N
BrandFacom
£8.05
Each
Units
- - - - - - - - -
Related Products
Micro-miniature test probes suitable for attaching to fine ...
Description:
Micro-miniature test probes suitable for attaching to fine pitch ICs (such as QFPs) down to lead pitches of 0·4mm.,Available in either short tip or 13mm long tip version. These probes come in pairs (one yellow & one green) and stack together within the space of a single probe. This allows ...
Insulated plug-on test prods with 2 mm stainless ...
Description:
Insulated plug-on test prods with 2 mm stainless steel tip and nylon housing. (Stock numbers 714-8207 and 714-8216 have a 8-32 thread on the point).These test prods are compatible with both insulated, non insulated or retractable 4mm banana plugs which are connected via a 4mm nickel plated brass banana jack. ...
Test probe safety system with elastic, hardwearing insulating ...
Description:
Test probe safety system with elastic, hardwearing insulating sleeve and slim stainless steel tipTip for piercing insulation/oxide layersØ 4 mm socket connector made from brassSafety test leads can be plugged inFor sliding sleeve and rigid sleeve systemsCAT II and CAT III versions.
Hirschmann Test and Measurement CAT I 4mm safety ...
Description:
Hirschmann Test and Measurement CAT I 4mm safety range, unsprung needle point stainless steel test probes with shatter proof insulated sleeve and a rear 4 mm socket. Insulation and oxide layers can be penetrated by the 2mm needle point of these safety series test probes, offered in black and red ...