Programmable Gain Amplifiers

Programmable gain amplifiers - or PGAs - are a type of electronic amplifier that allow you to control the gain in an electronic circuit (the ratio of output voltage, current or power to input) with digital signals. The gain can be set from less than 1 to over 100 volts.

What do programmable gain amplifiers do?

Programmable gain amplifiers work by increasing the power of a signal (a time-varying voltage or current) in your electronic circuit.

They use electric power from a power supply to increase the amplitude of a signal. The amount of amplification provided by the programmable gain amplifier is measured by its gain.

Applications for programmable gain amplifiers

Common applications for programmable gain amplifiers are motor control, signal and sensor conditioning, as well as in bar code readers and digital cameras. They can also be used for A/D converter driver applications, multiplexed analog applications, data acquisition, industrial instrumentation, test equipment and for use in medical instruments.


...
Read more Read less

Filters

Viewing 1 - 20 of 54 products
Results per page
Description Price Power Supply Type Typical Single Supply Voltage Typical Dual Supply Voltage Maximum Input Offset Voltage Maximum Input Resistance Number of Channels per Chip Rail to Rail Mounting Type Package Type Pin Count Minimum CMRR Output Type Dimensions Height
RS Stock No. 517-0283
Mfr. Part No.PGA309AIPWT
£5.42
Each
Units
- - - - - - - Surface Mount TSSOP 16 - - 5 x 4.4 x 1.15mm 1.15mm
RS Stock No. 165-4696
Mfr. Part No.MCP6S91-E/SN
BrandMicrochip
£0.503
Each (In a Tube of 100)
Units
Single 3 V, 5 V - 4mV 10000000MΩ 1 Rail to Rail Input/Output Surface Mount SOIC 8 - Rail to Rail 4.9 x 3.9 x 1.25mm 1.25mm
RS Stock No. 162-4838
Mfr. Part No.PGA309AIPWT
£3.339
Each (On a Reel of 250)
Units
- - - - - - - Surface Mount TSSOP 16 - - 5 x 4.4 x 1.15mm 1.15mm
RS Stock No. 628-3526
Mfr. Part No.MCP6S91-E/SN
BrandMicrochip
£0.658
Each (In a Pack of 5)
Units
Single 3 V, 5 V - 4mV 10000000MΩ 1 Rail to Rail Input/Output Surface Mount SOIC 8 - Rail to Rail 4.9 x 3.9 x 1.25mm 1.25mm
RS Stock No. 919-9843
Mfr. Part No.LTC6910-2CTS8#TRMPBF
£1.354
Each (On a Reel of 500)
Units
Dual, Single 10.5 V 10.5V 1.5mV 100MΩ 1 Rail to Rail Output Surface Mount TSOT-23 8 55dB - 2.9 x 1.75 x 0.9mm 0.9mm
RS Stock No. 761-9673
Mfr. Part No.LTC6910-2CTS8#TRMPBF
£2.03
Each
Units
Dual, Single 10.5 V 10.5V 1.5mV 100MΩ 1 Rail to Rail Output Surface Mount TSOT-23 8 55dB - 2.9 x 1.75 x 0.9mm 0.9mm
RS Stock No. 165-4880
Mfr. Part No.MCP6G01T-E/OT
BrandMicrochip
£0.263
Each (On a Reel of 3000)
Units
Single 3 V, 5 V - 4.5mV - 1 Rail to Rail Input/Output Surface Mount SOT-23 5 - Rail to Rail 3.1 x 1.8 x 1.3mm 1.3mm
RS Stock No. 666-5694
Mfr. Part No.MCP6G01T-E/OT
BrandMicrochip
£0.348
Each (In a Pack of 10)
Units
Single 3 V, 5 V - 4.5mV - 1 Rail to Rail Input/Output Surface Mount SOT-23 5 - Rail to Rail 3.1 x 1.8 x 1.3mm 1.3mm
RS Stock No. 661-2426
Mfr. Part No.PGA112AIDGST
£2.10
Each
Units
Single 3 V, 5 V - 0.325mV 10000MΩ 1 Rail to Rail Input/Output Surface Mount MSOP 10 - Rail to Rail 3 x 3 x 1.02mm 1.02mm
RS Stock No. 496-7193
Mfr. Part No.AD8555ARZ
£6.31
Each
Units
Single 3 V, 5 V - 0.01mV - 1 Rail to Rail Input/Output Surface Mount SOIC 8 96dB Rail to Rail 5 x 4 x 1.5mm 1.5mm
RS Stock No. 162-5478
Mfr. Part No.PGA112AIDGST
£1.392
Each (On a Reel of 250)
Units
Single 3 V, 5 V - 0.325mV 10000MΩ 1 Rail to Rail Input/Output Surface Mount MSOP 10 - Rail to Rail 3 x 3 x 1.02mm 1.02mm
RS Stock No. 912-8813
Mfr. Part No.AD8555ARZ
£4.776
Each (In a Tube of 98)
Units
Single 3 V, 5 V - 0.01mV - 1 Rail to Rail Input/Output Surface Mount SOIC 8 96dB Rail to Rail 5 x 4 x 1.5mm 1.5mm
RS Stock No. 538-5889
Mfr. Part No.AD8331ARQZ
£8.72
Each
Units
Single 5 V - - 0.006MΩ 1 No Surface Mount QSOP 20 - Differential 8.66 x 3.91 x 1.65mm 1.65mm
RS Stock No. 814-3745
Mfr. Part No.PGA113AIDGST
£2.038
Each (In a Pack of 5)
Units
Single 2.2 → 5.5 V - ±325µV 150Ω 1 Rail to Rail Output Surface Mount VSSOP 10 - Rail to Rail 3.1 x 3.1 x 0.95mm 0.95mm
RS Stock No. 162-8307
Mfr. Part No.PGA113AIDGST
£1.415
Each (On a Reel of 250)
Units
Single 2.2 → 5.5 V - ±325µV 150Ω 1 Rail to Rail Output Surface Mount VSSOP 10 - Rail to Rail 3.1 x 3.1 x 0.95mm 0.95mm
RS Stock No. 522-8837
Mfr. Part No.AD526JNZ
£14.44
Each
Units
Dual - ±12 V, ±15 V, ±5 V, ±9 V 1.5mV - 1 No Through Hole PDIP 16 - - 20.07 x 6.35 x 3.3mm 3.3mm
RS Stock No. 912-7536
Mfr. Part No.AD8331ARQZ
£7.169
Each (In a Tube of 56)
Units
Single 5 V - - 0.006MΩ 1 No Surface Mount QSOP 20 - Differential 8.66 x 3.91 x 1.65mm 1.65mm
RS Stock No. 145-6348
Mfr. Part No.AD526JNZ
£12.89
Each (In a Tube of 25)
Units
Dual - ±12 V, ±15 V, ±5 V, ±9 V 1.5mV - 1 No Through Hole PDIP 16 - - 20.07 x 6.35 x 3.3mm 3.3mm
RS Stock No. 121-9120
Mfr. Part No.THS7001IPWP
£4.748
Each (In a Tube of 70)
Units
Dual - ±12 V, ±15 V, ±5 V, ±9 V 9mV 1MΩ 1 - Surface Mount HTSSOP 20 80dB - 6.5 x 4.4 x 1.15mm 1.15mm
RS Stock No. 661-1221
Mfr. Part No.THS7001IPWP
£5.97
Each
Units
Dual - ±12 V, ±15 V, ±5 V, ±9 V 9mV 1MΩ 1 No Surface Mount HTSSOP 20 80dB - 6.5 x 4.4 x 1.15mm 1.15mm
Related Products
A range of operational amplifiers from Texas Instruments ...
Description:
A range of operational amplifiers from Texas Instruments designed for high-fidelity audio applications. The devices typically feature low levels of distortion and noise together with high slew rates and wide bandwidth. They are frequently able to operate over a wide supply voltage range and include outputs capable of driving 600 ...
A range of operational amplifiers from Texas Instruments ...
Description:
A range of operational amplifiers from Texas Instruments designed for high-fidelity audio applications. The devices typically feature low levels of distortion and noise together with high slew rates and wide bandwidth. They are frequently able to operate over a wide supply voltage range and include outputs capable of driving 600 ...
A range of high speed voltage comparators from ...
Description:
A range of high speed voltage comparators from Texas Instruments featuring response times of less than 200 ns. The range includes ultra-fast devices such as the TL3016 and TL3116 which have complementary (differential) outputs and typical switching times of 10 ns or less.
Current loop systems are used in electrically noisy ...
Description:
Current loop systems are used in electrically noisy industrial environments for sending analogue sensor data over long distances of 300m or more.