brands

attributes.Connector_A

attributes.Connector_B

attributes.Overall_Length

attributes.Inside_Diameter

attributes.Maximum_Operating_Pressure

attributes.Outside_Diameter

attributes.Inner_Hose_Material

attributes.Reinforcing_Material

attributes.Cover_Material

attributes.Connector_B_002d_Thread_Standard

attributes.Connector_A_002d_Angle

attributes.Connector_B_002d_Thread_Size

attributes.Connector_A_002d_Thread_Standard

attributes.Connector_B_002d_Gender

Parker 40000mm Synthetic Rubber Hydraulic Hose Assembly, 35 Mpa Max Pressure

Parker 40000mm Synthetic Rubber Hydraulic Hose Assembly, 1.7 Mpa Max Pressure

Parker Synthetic Rubber Hydraulic Hose Assembly, 280 bar Max Pressure

Parker Synthetic Rubber Hydraulic Hose Assembly, 420 bar Max Pressure

Parker 40000mm Synthetic Rubber Hydraulic Hose Assembly, 2.1 Mpa Max Pressure


Hydraulic hose assemblies consist of a hydraulic hose with fittings at the end, ready to be installed into a hydraulic system. Hydraulic hose assemblies feature a flexible hose that is used to transport fluid from one component to another within a hydraulic mechanism or machine. The pre-installed connectors make assemblies ideal for easy integration into your system.The hydraulic hose is usually made from a flexible rubber or wire, while the hose fittings are often made from a corrosion-resistant metal, such as stainless steel. Hydraulic hoses are often used in high-pressure environments so are required to be flexible and strong. You can find out more in our [hydraulic hoses guide](/web/content/discovery/ideas-and-advice/hydraulic-hoses-guide).

### What are hydraulic hoses made from?

Hydraulic hoses are made up from several layers to help to remain flexible but are reinforced for strength. The hoses tend to be made of three layers,Inner tube - this is the internal part of the hose. It needs to be compatible with the type of fluid that it will be transferring, so as to avoid corrosion.Reinforcement – this is a layer that surrounds the inner tube; made from wire which is either coiled or braided. This both supports and protects the inner tubeOuter Layer- The outer layer of the hydraulic hose is made of rigid materials which keep the internal contents safe and avoids the elements having any effect on the workings

### What to consider when choosing a hydraulic hose assembly:

Fittings/couplingsDiameterMaterialsOperating temperaturePressure

### Fitting Types:

It is important to choose a hose assembly which features a fitting/coupling that is compatible with where you wish to install it. This is usually a threaded connection, such as a G 1/4 or a G 3/8 female connector.



Hydraulic Hose Assemblies

Hydraulic Fittings & Tubing

Pneumatics & Hydraulics

1228569899

3577158573

3859839647

607105215

845068664

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

RS PRO 1954mm Synthetic Rubber Hydraulic Hose Assembly, 215bar Max Pressure

RS PRO 656mm Synthetic Rubber Hydraulic Hose Assembly, 275bar Max Pressure

RS PRO 1958mm Synthetic Rubber Hydraulic Hose Assembly, 330bar Max Pressure

Parker Hydraulic Hose Assemblies

27 Products showing for Parker Hydraulic Hose Assemblies

Popular Searches

Related links

Be the first to know about our latest products and services