Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow fittings being one example.

What are pneumatic elbow fittings used for?

Pneumatic elbow fittings are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow fittings

Pneumatic elbow fittings come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 61 - 80 of 882 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 176-2213
BrandRS PRO
£28.076
Each (In a Pack of 10)
Units
Threaded G 1/4 G 1/4 Female 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-1332
BrandRS PRO
£1.676
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0959
BrandRS PRO
£2.282
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 10 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 176-1343
BrandRS PRO
£1.987
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1804
BrandRS PRO
£2.815
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 144-2614
BrandRS PRO
£12.48
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 8 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1820
BrandRS PRO
£3.835
Each (In a Pack of 10)
Units
Tube-to-Tube Push In 12 mm Push In 12 mm - 90° - - - - No - 20 bar +80°C -20°C
RS Stock No. 176-1813
BrandRS PRO
£3.663
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1347
BrandRS PRO
£2.159
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-2216
BrandRS PRO
£23.38
Each (In a Pack of 10)
Units
Threaded G 1/8 G 1/8 Male 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-2170
BrandRS PRO
£22.731
Each (In a Pack of 10)
Units
Threaded-to-Tube M5 Push In 4 mm Male 90° Stainless Steel - - - Yes - 20 bar +200°C -15°C
RS Stock No. 176-1808
BrandRS PRO
£4.115
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 144-2618
BrandRS PRO
£22.27
1 Bag of 10
Bag(s)
Threaded-to-Tube R 3/8 Push In 10 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
New
RS Stock No. 187-5704
BrandRS PRO
£25.40
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
New
RS Stock No. 187-5701
BrandRS PRO
£23.70
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 144-2610
BrandRS PRO
£11.82
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/4 Push In 4 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1337
BrandRS PRO
£2.138
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1415
BrandRS PRO
£2.282
Each (In a Pack of 10)
Units
Threaded-to-Tube M5 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1341
BrandRS PRO
£1.816
Each (In a Pack of 10)
Units
Threaded-to-Tube M7 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1818
BrandRS PRO
£5.812
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/2 Push In 14 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
Related Products
Fully made of stainless steel AISI 316L. It ...
Description:
Fully made of stainless steel AISI 316L. It has been developed to drive corrosive fluids or to be used in aggressive environments. It is ideal for direct contact with food fluids. This line can be used also in salty environment and on machines that need frequent washing with aggressive detergents. ...
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal short)& Metric- Metal Robustness- Wide Range- Silicon FreeApplications:- neumatic Automation- ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a ...
RS Pro DN5 quick connect couplings with MIGNON ...
Description:
RS Pro DN5 quick connect couplings with MIGNON profile. Interchangeable with RECTUS/LEGRIS, PARKER 21/90, CAMOZZI 5050 - 5150, CEJN 220 and FESTO KD - KS 3- Working Pressure: 0 bar to 12 bar (1.2 MPa)- Working Temperature: - 20 °C to + 80 °C- Fluid: Compressed air.