Potentiometers

What is a potentiometer?



A potentiometer is a variable resistor. Potentiometers enable you to regulate and change the current flowing through a circuit. Potentiometers can also be called pots or potmeters.



Potentiometers have two terminals that are fixed to a resistive element (the track). The resistive element is typically wirewound or made from carbon, cermet or conductive plastic. The third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current flowing through the circuit changes.



Types of potentiometer



Rotary potentiometers are easily controlled by turning a spindle or a knob. Rotary potentiometers can be single turn or multiturn.



Slide potentiometers are also known as slider potentiometers or fader potentiometers. To use a slide potentiometer, it’s simply a case of sliding a fader along a straight track to change the resistance.



Trimmer potentiometers, sometimes called trimpots, are used to calibrate and fine-tune circuits and can be mounted straight onto a PCB (printed circuit board). Trimmer potentiometers are easy to adjust with a screwdriver.



String potentiometers (or string pots) take movement and transform it into an electrical signal.



Membrane potentiometers are completely flat. Membrane potentiometers change their resistance when pressure is applied to the membrane.



Do I need a potentiometer with a linear or logarithmic taper?



The taper you need for your potentiometer depends on the intended application.



For potentiometers with a linear taper, the resistance between one end of the track and the wiper varies at a constant rate. If you turn the potentiometer halfway or slide the fader halfway along the track, the resistance will be half of the total resistance. Linear taper potentiometers are typically used in applications such as light dimmer switches.



For logarithmic taper potentiometers, the resistance does not vary at a constant rate. The level of resistance moves exponentially up or down. A potentiometer that has been turned or moved halfway along its track, will not produce resistance that is half the total resistance. Logarithmic potentiometers are commonly used for audio applications.



What is the difference between a potentiometer and a rheostat?



The key difference is the number of terminals that each device has. Potentiometers have three terminals while rheostats only have two terminals.



Looking for peripherals for your potentiometer?



Potentiometer Knobs

Potentiometer Accessories

Potentiometer Mounting Nuts

...
Read more Read less

Filters

Viewing 81 - 100 of 1992 products
Results per page
Description Price Maximum Resistance Potentiometer Type Number of Turns Number of Gangs Mounting Type Power Rating Shaft Diameter Electrical Taper Mounting Hole Diameter Element Material Termination Style Tolerance Series Shaft Length
RS Stock No. 842-7194
BrandRS PRO
£101.94
Each
Units
5kΩ Linear - 1 Spring Return - - Linear - Conductive Plastic - ±20% WT22 -
RS Stock No. 842-7018
BrandRS PRO
£4.02
Each
Units
2.5kΩ Rotary 1 1 Panel Mount 1W 6 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0742
BrandRS PRO
£1.75
Each (In a Box of 50)
Units
500Ω - 1 - Panel Mount 3W 6.35 mm - - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7093
BrandRS PRO
£13.67
Each
Units
500Ω Rotary 1 1 Panel Mount 3W 6.35 mm Linear - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7062
BrandRS PRO
£4.02
Each
Units
25Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0741
BrandRS PRO
£1.667
Each (In a Box of 50)
Units
500Ω - 1 - Panel Mount 3W 6.35 mm - - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7046
BrandRS PRO
£13.67
Each
Units
500Ω Rotary 1 1 Panel Mount 3W 6.35 mm Linear - Wirewound Solder ±10% P40 68mm
RS Stock No. 173-0729
BrandRS PRO
£1.167
Each (In a Box of 50)
Units
25Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7043
BrandRS PRO
£4.02
Each
Units
500Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7153
BrandRS PRO
£36.43
Each
Units
1kΩ Rotary 1 1 Servo Mount 3W 6 mm Linear - Wirewound Solder ±10% 50WW 21.5mm
RS Stock No. 173-0727
BrandRS PRO
£1.167
Each (In a Box of 50)
Units
500Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0754
BrandRS PRO
£3.547
Each (In a Box of 50)
Units
1kΩ - 1 - Panel Mount 1W 6.35 mm - - Conductive Plastic Solder ±20% NP23 20mm
RS Stock No. 173-0767
BrandRS PRO
£24.29
Each (In a Box of 50)
Units
1kΩ - 1 - Servo Mount 3W 6 mm - - Wirewound Solder ±10% 50WW 21.5mm
RS Stock No. 842-7129
BrandRS PRO
£10.39
Each
Units
1kΩ Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Conductive Plastic Solder ±20% NP23 20mm
RS Stock No. 842-7122
BrandRS PRO
£12.06
Each
Units
1kΩ Rotary 1 1 Bushing Mount 1W 6.35 mm Linear - Conductive Plastic Solder ±20% NP22 25mm
RS Stock No. 173-0756
BrandRS PRO
£3.902
Each (In a Box of 50)
Units
1kΩ - 1 - Bushing Mount 1W 6.35 mm - - Conductive Plastic Solder ±20% NP22 25mm
RS Stock No. 173-0749
BrandRS PRO
£2.917
Each (In a Box of 50)
Units
50kΩ Rotary 1 - Panel Mount 3W 6.35 mm Linear - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7090
BrandRS PRO
£14.35
Each
Units
10kΩ Rotary 1 1 Panel Mount 3W 6.35 mm Linear - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7040
BrandRS PRO
£14.35
Each
Units
50kΩ Rotary 1 1 Panel Mount 3W 6.35 mm Linear - Wirewound Solder ±10% P40 25mm
RS Stock No. 173-0738
BrandRS PRO
£1.604
Each (In a Box of 50)
Units
10kΩ - 1 - Panel Mount 3W 6.35 mm - - Wirewound Solder ±10% P40 68mm
Related Products
Bourns PDB241-GTR series standard drop-in replacement "guitar pots" ...
Description:
Bourns PDB241-GTR series standard drop-in replacement "guitar pots" with a knurled or solid shaft. The PDB241-GTR series potentiometers are available in a variety of resistance values and either Audio or Linear taper options. Low torque Carbon element Plain or knurled shaft option Metal bushing Metal shaft Rear solder lugs. 24 ...
PDB185-GTR 17mm guitar potentiometers with a DPDT latching ...
Description:
PDB185-GTR 17mm guitar potentiometers with a DPDT latching push switch and carbon element. These PDB185-GTR guitar potentiometers have a metal split knurled shaft, metal bushing and linear and audio taper options. PDB185-GTR 17mm Guitar Potentiometer with Latching Push Switch.
This series of RS potentiometers offer a range ...
Description:
This series of RS potentiometers offer a range of resistance options between 100Ω and 10kΩ. They are single turn wirewound potentiometers with a 6mm diameter shaft and a rotational life of 100,000 revolutions. ±10% standard resistance tolerance285° rotation (mechanical angle)3W power rating. RS 40mm Wirewound Potentiometers.
Brought to you by RS PRO, a series ...
Description:
Brought to you by RS PRO, a series of rotary potentiometers suitable for various applications. Widely used within electronics, each model can be mounted within various devices or even on PCB applications. These particular models generally have a rotational life of 100,000 revolutions and will excel within audio or electronic ...